anybody check this out yet? is it good? bad? comments please!!!
http://cgi.ebay.com/ebaymotors...33630

 

looks good to me

 

get this one and tell me if it works, http://cgi.ebay.com/ebaymotors...rd=1

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SpecialEdxl &raquo;</TD></TR><TR><TD CLASS="quote">get this one and tell me if it works, http://cgi.ebay.com/ebaymotors...rd=1 </TD></TR></TABLE>
Hell no, mine is similar to the N-1 that was posted and it hangs way too low for me. Mine is about 2.5 inches of of the ground, i can barley go over speed bumps and it is all banged up after a few months. I'd say go with the 1st one, it looks decent.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4thgenhothatch &raquo;</TD></TR><TR><TD CLASS="quote">anybody check this out yet? is it good? bad? comments please!!!
http://cgi.ebay.com/ebaymotors...33630</TD></TR></TABLE>



Hayame is good quality.

-Jon

 

for the cost of that exhaust plus shipping, you might as well just save your money and get something like skunk2, invidia, tanabe... you'd be spending around 425-430 for the hayama when you could just save and find one of the above mentioned for right around 500, and you'd have no clearance issues or no worries, just a big

 

I am biased. i have kteller exhaust and love it. 2.25, 18in resonator and 14.in muffler. If only it didn't requires welding in the slips. even cleared my st rear sway bar.. good stock look. If you know a welder its a great deal, otherwise if you plan on installing rear swar bar do so before the exhaust is but together for fitment issiues. sooo quit if you need it to be. I get complements even from v8 guys. Also ruuning jdm dc sports and cat. help me get a 14.7 out out a b18a stock motor with only exhaust for motor mork. even had stock jdm airbox. very low-key.

 

looks like it would work if you didnt have any suspension, lol. is it just me or does it look like it doesnt go over the suspension?

 

Actually it bends up over the rear LCA. It's not very sharp though. Probably might hit if the car is lowered.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4potnick &raquo;</TD></TR><TR><TD CLASS="quote">I am biased. i have kteller exhaust and love it. 2.25, 18in resonator and 14.in muffler. If only it didn't requires welding in the slips. even cleared my st rear sway bar.. good stock look. If you know a welder its a great deal, otherwise if you plan on installing rear swar bar do so before the exhaust is but together for fitment issiues. sooo quit if you need it to be. I get complements even from v8 guys. Also ruuning jdm dc sports and cat. help me get a 14.7 out out a b18a stock motor with only exhaust for motor mork. even had stock jdm airbox. very low-key. </TD></TR></TABLE>

I have a similar setup =P

 

nm, im a dumbass


Modified by Skitals at 4:22 PM 4/22/2005

 

i know the stock bends like that anyway but doesn't that last 90 degree bend look a little extreme?

if you're going for all out performance and don't care about sound maybe you should look into a straighter system like a Skunk2 clone.

 

&lt;-------Saving up for Kteller........Cheaper than the hayame, and other than the welding part I haven't heard any complaints.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eumoria &raquo;</TD></TR><TR><TD CLASS="quote">i know the stock bends like that anyway but doesn't that last 90 degree bend look a little extreme?

if you're going for all out performance and don't care about sound maybe you should look into a straighter system like a Skunk2 clone.</TD></TR></TABLE>

the skunk2 system has that same 90 degree bend near the muffler

 

that looks kinda nice, anyone have a pic of that on there rexxy?

 

http://www.vrsexhaust.com
Cheaper then Kteller, but you didn't hear that from me.
Some stuff also, but you also didn't hear that from me.

 

bump cus i need a muffler with out me welding cus i cant

 

Looks like a fartcan to me get a Greddy Mine came in last week and it sounds nice.

 

summitracing.com has or had like 6 months ago he dc sports exhaust and I got it here for $299

I cant find a better deal and its really throaty no popping or anything with my b16a

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by goforbroke &raquo;</TD></TR><TR><TD CLASS="quote">http://www.vrsexhaust.com
Cheaper then Kteller, but you didn't hear that from me.
Some stuff also, but you also didn't hear that from me. </TD></TR></TABLE>



Will keep that in mind