testing water- 96 Civic HB with mild built b20vtec ek ctr ***low miles***
6800 obo by the end of this week...serioius buyers please... sold as is...need to sell fast so i can get a bike...call me at (408)390-3038
Car:
1996 civic hatchback dx
appox. body:46,000
motor:20,000
silver w/ painted side molding and side mirrors
2000 civic si front end
ctr rear lip
new clifford RSX 3.5 with remote start/paging
interior:
stock
ex cluster
ex armrest
AC
Motor:
b16 head
mild porting
type r valves
type r valve spring and retainer
skunk2 stage 1 cams
aem cam gears
b20b block
golden eagle sleeves
je pistons(type r compression)
eagle rods
z10 block gaurd
walbro fuel pump
rc 310 injectors
type r intake manifold
jg 65mm throttle body
aem fuel pressure regulator
dc 4-1 2.5" header
aem cold air intake
weapon r oil catch can
skunk2 exhaust system
urbadata chipped ECU(p28)
tranmission:
b16 tranny
act clutch
gsr shifter
suspension:
ground control adjustable spring
tokico blue shocks
factory front sway bar
aem rear swap bar
skunk2 strut bar
rear lower tie bar
GSR brake conversion(front and rear)
Ls-mesh rims
was dyno at 198hp and 145tq @ wheels at DNR shop in hayward...have slips
time with bald stock tires and poped out o2 sensor and best time is 14.2...going back for the second time with new tires and fixed o2 sensor and msd launch control so should track mid 13's
Might have missed some thing i'll add as it goes...








bump if your pass through this thread...thanx for looking
Modified by 408projectEK9 at 12:14 PM 5/3/2005
Modified by 408projectEK9 at 12:17 PM 5/3/2005
Modified by 408projectEK9 at 12:19 PM 5/3/2005
Modified by crazyEK9 at 8:17 PM 5/3/2005
Modified by crazyEK9 at 11:06 AM 5/4/2005
Car:
1996 civic hatchback dx
appox. body:46,000
motor:20,000
silver w/ painted side molding and side mirrors
2000 civic si front end
ctr rear lip
new clifford RSX 3.5 with remote start/paging
interior:
stock
ex cluster
ex armrest
AC
Motor:
b16 head
mild porting
type r valves
type r valve spring and retainer
skunk2 stage 1 cams
aem cam gears
b20b block
golden eagle sleeves
je pistons(type r compression)
eagle rods
z10 block gaurd
walbro fuel pump
rc 310 injectors
type r intake manifold
jg 65mm throttle body
aem fuel pressure regulator
dc 4-1 2.5" header
aem cold air intake
weapon r oil catch can
skunk2 exhaust system
urbadata chipped ECU(p28)
tranmission:
b16 tranny
act clutch
gsr shifter
suspension:
ground control adjustable spring
tokico blue shocks
factory front sway bar
aem rear swap bar
skunk2 strut bar
rear lower tie bar
GSR brake conversion(front and rear)
Ls-mesh rims
was dyno at 198hp and 145tq @ wheels at DNR shop in hayward...have slips
time with bald stock tires and poped out o2 sensor and best time is 14.2...going back for the second time with new tires and fixed o2 sensor and msd launch control so should track mid 13's
Might have missed some thing i'll add as it goes...








bump if your pass through this thread...thanx for looking
Modified by 408projectEK9 at 12:14 PM 5/3/2005
Modified by 408projectEK9 at 12:17 PM 5/3/2005
Modified by 408projectEK9 at 12:19 PM 5/3/2005
Modified by crazyEK9 at 8:17 PM 5/3/2005
Modified by crazyEK9 at 11:06 AM 5/4/2005
Trending Topics
bump for a clean hatch, what was your MPH on the 14.2 run that sounds a little weak considering u dyno'd at 198hp ....
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BiziggumS »</TD></TR><TR><TD CLASS="quote">how much are u relatively looking for? 7,8 or so?</TD></TR></TABLE>
7 or 8k is what i want for all the money i paid but i know i'll never get that much thats why i'm only asking for trades...thanx
7 or 8k is what i want for all the money i paid but i know i'll never get that much thats why i'm only asking for trades...thanx
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hatch34 »</TD></TR><TR><TD CLASS="quote">clean *** hatch wanna trade?</TD></TR></TABLE>
what u got to trade? thanx
what u got to trade? thanx
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TeamDOHCside »</TD></TR><TR><TD CLASS="quote">bump for a clean hatch, what was your MPH on the 14.2 run that sounds a little weak considering u dyno'd at 198hp ....</TD></TR></TABLE>
i was going 98.525 mph for 14.2...reason is bold stock integra tires and o2 sensor poped out...next CMI i will be tracking better time for sure...i'll keep u guys posted...
i was going 98.525 mph for 14.2...reason is bold stock integra tires and o2 sensor poped out...next CMI i will be tracking better time for sure...i'll keep u guys posted...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18a2705 »</TD></TR><TR><TD CLASS="quote">bump for cleanness...
</TD></TR></TABLE>
thanx
</TD></TR></TABLE>thanx
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tofumonzter »</TD></TR><TR><TD CLASS="quote">bump for a fellow replica b20 as mine
</TD></TR></TABLE>
mine looks better tho huh?
...hahahahhaha...naw just playing thanx for the bump
</TD></TR></TABLE>mine looks better tho huh?
...hahahahhaha...naw just playing thanx for the bump
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 408projectEK9 »</TD></TR><TR><TD CLASS="quote">
mine looks better tho huh?
...hahahahhaha...naw just playing thanx for the bump</TD></TR></TABLE>
yeah yours may look better but i bet mine goes faster HAHAHA
mine looks better tho huh?
...hahahahhaha...naw just playing thanx for the bump</TD></TR></TABLE>yeah yours may look better but i bet mine goes faster HAHAHA
https://honda-tech.com/zerothread?id=1212303
its not an integra? but check it out.
its not an integra? but check it out.



