New prices on some stuff
Basically someones project didn't get off the ground at all and I bought what I thought was a running motor turns out it hasn't had oil in it for over a year and now wont turnover . Just trying to make my money back.
I have some vouches here on h/t including Civic 138,-jeremy-,TURBOEJ6, and ZacCarter. I will be on line the next 2 days alot and have paypal.
How to contact me
AIM:Danne941
Email:Danne941@gmail.com
Here on h-t.

PIC ARE UP SCROLL DOWN
here are my parts yo.

Tranny LS hydro tranny very low miles no grinds- sold
Tapped LS oil pan and new gasket in box (no drain bolt)- sold
Brand new only used to mount a motor in a shell AVID race mounts for an EK- sold
99-00 SI rear tranny and drivers side mounts- 60 plus shipping
obd2 LS distributor low miles very clean -50 bucks and shipping
obd2 ls starter- sold
obd2 p75 LS ecu- 100 plus shipping
Exedy Stage one clutch and pressure plate mounted never ran-sold
Not sure on brand 2lb crank pulley for b-series-Sold
b series alternator kinda crusty looking- sold
obd2 LS head very clean 70 bucks and shipping
obd2 LS uncut harness 50 bucks and shipping

Modified by Sc2_Dan at 8:17 PM 4/21/2005


Modified by Sc2_Dan at 9:50 PM 4/22/2005


Modified by Sc2_Dan at 9:50 PM 4/22/2005


Modified by Sc2_Dan at 6:23 PM 4/24/2005


Modified by Sc2_Dan at 12:30 PM 4/26/2005


Modified by Sc2_Dan at 9:52 PM 4/28/2005


Modified by Sc2_Dan at 9:54 PM 4/28/2005


Modified by Sc2_Dan at 9:57 PM 4/28/2005

 

Bump for a good guy that got jipped by a not so good guy.

 

Buy this poor guy's stuff!!!!

 

up for this guy

 

 

 

before bed bump

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -JEREMY- &raquo;</TD></TR><TR><TD CLASS="quote">before bed bump
</TD></TR></TABLE>

 

TTT!

 

Got pics of the AVID mounts, and which mounts do they replace? Thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by klungemonger &raquo;</TD></TR><TR><TD CLASS="quote">Got pics of the AVID mounts, and which mounts do they replace? Thanks</TD></TR></TABLE>

I will have pics tonite probably it is the pass side the drivers side and the rear tranny.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sc2_Dan &raquo;</TD></TR><TR><TD CLASS="quote">

I will have pics tonite probably it is the pass side the drivers side and the rear tranny.</TD></TR></TABLE>

Hmm, no rush then, I already have the stock ones for driver side upper and tranny side mounts, I'm only needing the rear and front tranny mounts pretty much...

 

 

up for my cutie pie

 

Bump 4 parts in TN. I still hae that 96-00 Hatch rear bumper

 

Pics added





Was tapped on wrong side then retapped

 

does it have throwout bearing, pilot bearing, and allignment tool? if so do you know if it will fit an b18a with a b16 tranny?

 

Throwout bearing is pictured. Pilot bearing is on my flywheel. No clutch alignment tool but you dont need one if you know what you are doing just search. If it is a hydro tranny it will work

 

bump to the top...................

come on people, you all know you need these parts,so buy them, help out a fellow HT member.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Civic138 &raquo;</TD></TR><TR><TD CLASS="quote">bump to the top...................

come on people, you all know you need these parts,so buy them, help out a fellow HT member.</TD></TR></TABLE>

 

 

 

night night

 

in school, morning bump

 

Bout to head to a junkyard bump