BUILT GSR MOTOR AND TURBO KIT 0 MILES
1996 GSR BLOCK
arias pistons
golden eagle rods
nuformz block guard
81mm 8.5:1 compression
all new bearings ets.
0 miles just put together
has been cold tanked
1997 GSR HEAD
itr springs and retainers
stock valves
skunk2 intake manifold
stock gsr cams
head is taken apart because i was going to buy stainless valves
it has new valve guides
there might be more stuff with the motor but this is all i can think of right now
turbo kit
garret t3/4
mprd equal length manifold
3" downpipe with flange to run open downpipe
vortech fmu
gfb (go fast bits) blow off valve
deltagate waste gate
front mount intercooler (similar to jhony racer)
missing piping and fuel pump
oil feed lines
tapped gsr oil pan
must sell $3500 i have about $5500 into this project
located in reno NV but will deliver to the bay area if you leave a deposit.
njp17@aol.com
650-430-8492
arias pistons
golden eagle rods
nuformz block guard
81mm 8.5:1 compression
all new bearings ets.
0 miles just put together
has been cold tanked
1997 GSR HEAD
itr springs and retainers
stock valves
skunk2 intake manifold
stock gsr cams
head is taken apart because i was going to buy stainless valves
it has new valve guides
there might be more stuff with the motor but this is all i can think of right now
turbo kit
garret t3/4
mprd equal length manifold
3" downpipe with flange to run open downpipe
vortech fmu
gfb (go fast bits) blow off valve
deltagate waste gate
front mount intercooler (similar to jhony racer)
missing piping and fuel pump
oil feed lines
tapped gsr oil pan
must sell $3500 i have about $5500 into this project
located in reno NV but will deliver to the bay area if you leave a deposit.
njp17@aol.com
650-430-8492
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SHystrdyGSRtdy »</TD></TR><TR><TD CLASS="quote">let me know if you part it out, i'm interested in the oil pan
</TD></TR></TABLE>
the only way i will part out is turbo kit and motor not piece by piece. thanks
</TD></TR></TABLE>the only way i will part out is turbo kit and motor not piece by piece. thanks
Trending Topics
are you serious? sounds too cheap to be true..
i have the money here..
if it's not sold yet. please send me some pics to
jeffyoon81@hotmail.com
peace
i have the money here..
if it's not sold yet. please send me some pics to
jeffyoon81@hotmail.com
peace
Thread
Thread Starter
Forum
Replies
Last Post
ACrite3404
Southern California (Sales)
39
Jul 5, 2008 08:21 AM
Retired
Classifieds: Forced Induction
4
Oct 12, 2004 12:39 PM



