Texas: 96' Prelude w/ JDM h22 NEED to sell!
I am selling my car because i am heading out to Texas Tech this summer and a prelude is just not a practical car for my needs. I have taken great care of the car, washing it once a week and making sure everything is in proper working order. We are the second owner and recieved the car at 90k miles. The jdm h22 was swapped in at 111k and it currently has 113k miles. All work was done by a friend and I, or professionally done by a local shop "Independent Foreign car". The wiring for the swap was done by a preformance shop "Redline". There are little problems here and there on the car, but i have no time and money to take car of them. All of the problems do NOT effect my everyday driving. Here are the modifications:
Engine
-Ebay intake
-Megan racing 4-2-1 header
-Ebay test pipe
-Apexi WS II cat-back (had to be custom fitted at a muffler shop)
-8lb. fidanza flywheel
-Clutch Master Stage 1 clutch
Suspension
-Kyb AGX 4-way ajustable struts
-Neuspeed race springs
-front strut bar
Exterior
-JDM black housing 1 piece headlights
-92/93 amber bumper lights
-PIAA bulbs
Misc
-Lightning motorsports OBDI to OBDII ecu harness
-OBDI JDM ecu was used for the swap
-New h23 tranny w/ no grinds(original one grinded going into 5th)
-Polished Shift ****
-Recently new Tires- Kumho Ecstas
-Rubber Mats(I dont know what i would do without these!)
Problems/Needs
-VERY small leak in the oil pan gasket
-VERY small leak in the vtec solenoid
-ABS does NOT work (common for 4th gen's)
-cruise control was removed for extra space(never used it)
-speakers are blown but i use my high pass filter through the face plate
-Needs a camper kit
-CEL due to the test pipe(02 sensor thinks the cat is bad)
-MULTIPLE chips in the front bumper
-Sunroof rattles on bumpy roads
-Currently has no inspection(NEED HELP!)
-One headlight is dirty on the inside
-Would'nt hurt to have the brakes checked out








I am a very honest seller and i can have a few people vouch for my car if you need them to. This is a very clean 4th gen prelude and will be missed very much!
If you have any questions or concerns PLEASE call me @ 817-938-8865 or email me @ Bigmaggie24@yahoo.com, thanks!
Modified by yeahdudebrown at 1:31 AM 4/6/2005
Modified by yeahdudebrown at 1:46 AM 4/6/2005
Engine
-Ebay intake
-Megan racing 4-2-1 header
-Ebay test pipe
-Apexi WS II cat-back (had to be custom fitted at a muffler shop)
-8lb. fidanza flywheel
-Clutch Master Stage 1 clutch
Suspension
-Kyb AGX 4-way ajustable struts
-Neuspeed race springs
-front strut bar
Exterior
-JDM black housing 1 piece headlights
-92/93 amber bumper lights
-PIAA bulbs
Misc
-Lightning motorsports OBDI to OBDII ecu harness
-OBDI JDM ecu was used for the swap
-New h23 tranny w/ no grinds(original one grinded going into 5th)
-Polished Shift ****
-Recently new Tires- Kumho Ecstas
-Rubber Mats(I dont know what i would do without these!)
Problems/Needs
-VERY small leak in the oil pan gasket
-VERY small leak in the vtec solenoid
-ABS does NOT work (common for 4th gen's)
-cruise control was removed for extra space(never used it)
-speakers are blown but i use my high pass filter through the face plate
-Needs a camper kit
-CEL due to the test pipe(02 sensor thinks the cat is bad)
-MULTIPLE chips in the front bumper
-Sunroof rattles on bumpy roads
-Currently has no inspection(NEED HELP!)
-One headlight is dirty on the inside
-Would'nt hurt to have the brakes checked out








I am a very honest seller and i can have a few people vouch for my car if you need them to. This is a very clean 4th gen prelude and will be missed very much!
If you have any questions or concerns PLEASE call me @ 817-938-8865 or email me @ Bigmaggie24@yahoo.com, thanks!
Modified by yeahdudebrown at 1:31 AM 4/6/2005
Modified by yeahdudebrown at 1:46 AM 4/6/2005
Oh yeah, asking price is 6k and im pretty firm on the price. I can replace any part with the stock part and include all stock parts with the purchase of the car.
Modified by yeahdudebrown at 1:34 AM 4/6/2005
Modified by yeahdudebrown at 1:34 AM 4/6/2005
Trending Topics
Thanks for the comments!
I might be parting it out if im not able to sell it as is, but as of right now i am not parting it out.
It is a SI model, not a vtec model. The h23 was perfectly healthy when it was swapped out. The h22a was purchased from Hmotorsonline, which is a very good vendor. I will take a pic of the interior today!
I might be parting it out if im not able to sell it as is, but as of right now i am not parting it out.
It is a SI model, not a vtec model. The h23 was perfectly healthy when it was swapped out. The h22a was purchased from Hmotorsonline, which is a very good vendor. I will take a pic of the interior today!
Thread
Thread Starter
Forum
Replies
Last Post
RemerLex11
Vehicles for sale
166
Jun 2, 2006 12:29 PM




