COMPLETE D-SERIES PART OUT!!!! CHEAP WITH TURBO STUFF TOO TONS OF PICS!!!!!!!!!!!!!
Thread Starter
Junior Member
Joined: Aug 2003
Posts: 750
Likes: 0
From: some were in, mi, united states
<u> FOR SALE EVERYTHING IS OBO SO THROW UP THE OFFERS!!!</u>
(1) D SERIES T3 EQUAL LENGTH NEUKIN TURBO MANIFOLD WITH 38MM FLANGE - $600 VERY VERY FIRM
I bought this a few weeks ago, NEVER RAN, NEW IN BOX! its thick as ****, and incredible welds, its got a life time warrenty, it will fit any 88-00 d-series engine, I need to sell so i can get the b-series one :-D http://www.neukin.com
http://nexus.colum.edu/class/2...1.JPG
http://nexus.colum.edu/class/2...2.JPG
(1) D SERIES TURBO MANIFOLD $OLD!!
http://nexus.colum.edu/class/2...1.jpg
---------------------------------------------------------------------------
<u>*** D16z6 COMPLETE SWAP PART OUT!!!*** -</u>
(1) 1995 D16Z6 BARE ENGINE BLOCK- USED 150K $100.00
Cleaned up and spray painted sliver, will include windage tray, and oil pump and crank thingie, and fly wheel...
http://nexus.colum.edu/class/2...1.jpg
(1) 1995 D16Z6 V-TEC HEAD COMPLETE - USED 150k $200.00
Good head :-D no oil cooking at all looks brand spanking new, will include valve cover, dizzy, v-tec selinoid, plug wires, intake manifold, ect...
http://nexus.colum.edu/class/2...1.jpg
http://nexus.colum.edu/class/2...2.jpg
http://nexus.colum.edu/class/2...3.jpg
http://nexus.colum.edu/class/2...1.jpg
(1) 1995 D16Z6 HYDRO TRANS - USED 150k $125.00
***WILL SELL AXELS/MOUNTS/SHIFT LINKAGE/ SENSORS/EVERYTHING YOU NEED FOR $75.00 EXTRA***
Stock clutch, NO GRINDS no problems with reverse gear everythings in working order...
http://nexus.colum.edu/class/2...1.jpg
http://nexus.colum.edu/class/2...1.jpg
(1) D16z6 V-TEC ENGINE HARNESS - $75.00
d16z6 engine harness non cut! come get it!
http://nexus.colum.edu/class/2...1.jpg
(2) D16z6 CRANKS - $100
Got both from blocks... not using them... good for building... could use micro polish and stuff...
---------------------------------------------------------------------------
(1) BLOWN D16z6 SHORTBLOCK - MAKE OFFER
It threw a rod through the block, so none of the internals are really good, if you needed like a oil pump, or crank pully or a sensor it can prolly be found here.
(1) D16Y6 HEAD & EXHAUST MANIFOLD- $100.00
Bought it off mbiker97, its clean and looks to be in good condition, its a non v-tec head, has all sensors and junk on it also.
(4) 16x7 TEAM DYNAMIC RIMS WITH TOYO PROXY TIRES- $300 FIRM
PENDING PENDING PENDING PENDING PENDING PENDING
ROCKFORD SUB, AMP, BOX, WIRING PACKAGE - $300
Bought from best buy last year this retails over 700+, its a rockford 1200 watt amp, with a wood and plexi glass 12" ported inclosure, with the rockford 12" he-2, will all rockford 2 gauge wiring, includes RCA and remote cables well as ground cable, and power cable. this thing ******* hit in my hatch...ALSO COMES WITH A 4 YEAR BEST BUY NOVI WARRANTY!!!!
http://nexus.colum.edu/class/2...1.JPG

any questions PM me thanks!
Modified by 98gsrTEG at 11:52 AM 3/17/2005
(1) D SERIES T3 EQUAL LENGTH NEUKIN TURBO MANIFOLD WITH 38MM FLANGE - $600 VERY VERY FIRM
I bought this a few weeks ago, NEVER RAN, NEW IN BOX! its thick as ****, and incredible welds, its got a life time warrenty, it will fit any 88-00 d-series engine, I need to sell so i can get the b-series one :-D http://www.neukin.com
http://nexus.colum.edu/class/2...1.JPG
http://nexus.colum.edu/class/2...2.JPG
(1) D SERIES TURBO MANIFOLD $OLD!!
http://nexus.colum.edu/class/2...1.jpg
---------------------------------------------------------------------------
<u>*** D16z6 COMPLETE SWAP PART OUT!!!*** -</u>
(1) 1995 D16Z6 BARE ENGINE BLOCK- USED 150K $100.00
Cleaned up and spray painted sliver, will include windage tray, and oil pump and crank thingie, and fly wheel...
http://nexus.colum.edu/class/2...1.jpg
(1) 1995 D16Z6 V-TEC HEAD COMPLETE - USED 150k $200.00
Good head :-D no oil cooking at all looks brand spanking new, will include valve cover, dizzy, v-tec selinoid, plug wires, intake manifold, ect...
http://nexus.colum.edu/class/2...1.jpg
http://nexus.colum.edu/class/2...2.jpg
http://nexus.colum.edu/class/2...3.jpg
http://nexus.colum.edu/class/2...1.jpg
(1) 1995 D16Z6 HYDRO TRANS - USED 150k $125.00
***WILL SELL AXELS/MOUNTS/SHIFT LINKAGE/ SENSORS/EVERYTHING YOU NEED FOR $75.00 EXTRA***
Stock clutch, NO GRINDS no problems with reverse gear everythings in working order...
http://nexus.colum.edu/class/2...1.jpg
http://nexus.colum.edu/class/2...1.jpg
(1) D16z6 V-TEC ENGINE HARNESS - $75.00
d16z6 engine harness non cut! come get it!
http://nexus.colum.edu/class/2...1.jpg
(2) D16z6 CRANKS - $100
Got both from blocks... not using them... good for building... could use micro polish and stuff...
---------------------------------------------------------------------------
(1) BLOWN D16z6 SHORTBLOCK - MAKE OFFER
It threw a rod through the block, so none of the internals are really good, if you needed like a oil pump, or crank pully or a sensor it can prolly be found here.
(1) D16Y6 HEAD & EXHAUST MANIFOLD- $100.00
Bought it off mbiker97, its clean and looks to be in good condition, its a non v-tec head, has all sensors and junk on it also.
(4) 16x7 TEAM DYNAMIC RIMS WITH TOYO PROXY TIRES- $300 FIRM
PENDING PENDING PENDING PENDING PENDING PENDING
ROCKFORD SUB, AMP, BOX, WIRING PACKAGE - $300
Bought from best buy last year this retails over 700+, its a rockford 1200 watt amp, with a wood and plexi glass 12" ported inclosure, with the rockford 12" he-2, will all rockford 2 gauge wiring, includes RCA and remote cables well as ground cable, and power cable. this thing ******* hit in my hatch...ALSO COMES WITH A 4 YEAR BEST BUY NOVI WARRANTY!!!!
http://nexus.colum.edu/class/2...1.JPG
any questions PM me thanks!
Modified by 98gsrTEG at 11:52 AM 3/17/2005
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
B18C1CYA
Forced Induction
405
Jun 1, 2009 08:28 AM
98gsrTEG
For Sale
5
Mar 21, 2005 06:58 PM
98gsrTEG
For Sale
8
Mar 7, 2005 06:07 PM




