Alright I'm looking to clarify some stuff. Everyone seems to say that the integra type-r's all have 240cc injectors. But I read some places that the 98-01 JDM ITR injectors are 290cc. Is this true? If so I might upgrade to the jdm injectors.

 

I believe they are 250cc, I bought a set of used jdm itr injectors and had them cleaned and blueprinted by RC engineering and on the flow sheet it showed the flow rate at 250cc across the board... have you tried looking into prelude injectors, I think they are around 280-290cc

 

good set of jdm prelude injectors for sale. also have resistor pack if you need it! $50 + $10 for resistor pack

 

B16,GSR and ITR injectors are all 240cc regardless if they are JDM or USDM.

 

Alright its just i saw this post and thought that it was true. Check out this post and send a message to the guy then for false advertising:
https://honda-tech.com/zerothread?id=1167509

 

Well since steve sakai is his tuner and he claims that the injectors are 290cc, I wouldn't doubt him. He knows his stuff pretty well...however I dunno why when I brought my injectors to RC engineering and had them clean and blueprinted, it says 250cc on the flow sheet.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wushubrian &raquo;</TD></TR><TR><TD CLASS="quote">Alright its just i saw this post and thought that it was true. Check out this post and send a message to the guy then for false advertising:
https://honda-tech.com/zerothread?id=1167509 </TD></TR></TABLE>

I posted with the relevant part numbers. He sold a set of GSR injectors.

 

All B-series injectors JDM or USDM, peak and hold or saturated are 240cc's.

-Brandon