Garage sale, everything ridiculously cheap or FREE (not joking)
ADDED SOME PICS BELOW!!
Need to clean some **** out. Everything is used, unless stated. Priced as listed or best offer. Shipping/packaging not included. If using paypal, please add a couple bucks for gas money to the shipping place. If you want pics of anything, let me know. Im sure Ill find more stuff so check back. Located in NY.
STILL FOR SALE:
ITR stock header - $30 (expensive to ship, pick up preferred)
ITR crank - taken out of my blown motor. Rod journal 3 needs to be re-cut due to a slight scuff. I took it to a machine shop and they said it can be repaired to good as new - $100
ITR TPS sensor - $25
ITR rear wiper assembly (no wiper blade) - $5
ITR clutch, some life left - $10
ITR rear main seal and housing (15K) - $5
custom 2.5inch B-pipe (no resonators), fits stock ITR exhaust system - $20 (expensive to ship, pick up preferred)
APC crankcase breather filter, chrome y0! - $5
NEW ITR throttle body studs (2) - $2
NEW Earls 1/8 NPT plug fitting to plug head oil passage - $2 (one left)
Integra shift boot - FREE with purchase
SOLD:
Spoon slotted front rotors for ITR, used, cut and ready to go - SOLD
ITR rear rotors used, can be cut - SOLD
ITR interior door handle bezels (2) with lock switch - SOLD
ITR MAP sensor - SOLD
ITR intake arm (1.5in shortened) and airbox w/ filter - SOLD
NEW Hondata Intake Manifold Gasket - for B16/ITR - SOLD
ITR oil cooler, with center "bolt" - SOLD
ITR calipers, painted red, I suggest a rebuild kit - SOLD
ITR cam gears - SOLD
ITR upper driver side engine mount bracket - SOLD even though it was FREE
ITR water pump (20K miles) - SOLD
ITR oil pump and seal (20K miles) - SOLD
ITR oil pickup - SOLD
ITR block girdle - SOLD
NEW OEM ITR throttle body gasket (new) - SOLD
OEM rear window grommet for wiper removal - SOLD
NEW Earls 1/8 NPT plug fitting to plug head oil passage - SOLD
front upper ITR control arms - SOLD
NEW OEM ITR timing belt covers (top and bottom), and lower gasket portion - SOLD
add .orig.jpg for bigger pics



Spoon rotors left, stock rears right (kinda dusty, been sitting in a box for awhile)

side view Spoons

side view rears

Modified by clip the apex at 8:29 AM 4/19/2006
Need to clean some **** out. Everything is used, unless stated. Priced as listed or best offer. Shipping/packaging not included. If using paypal, please add a couple bucks for gas money to the shipping place. If you want pics of anything, let me know. Im sure Ill find more stuff so check back. Located in NY.
STILL FOR SALE:
ITR stock header - $30 (expensive to ship, pick up preferred)
ITR crank - taken out of my blown motor. Rod journal 3 needs to be re-cut due to a slight scuff. I took it to a machine shop and they said it can be repaired to good as new - $100
ITR TPS sensor - $25
ITR rear wiper assembly (no wiper blade) - $5
ITR clutch, some life left - $10
ITR rear main seal and housing (15K) - $5
custom 2.5inch B-pipe (no resonators), fits stock ITR exhaust system - $20 (expensive to ship, pick up preferred)
APC crankcase breather filter, chrome y0! - $5
NEW ITR throttle body studs (2) - $2
NEW Earls 1/8 NPT plug fitting to plug head oil passage - $2 (one left)
Integra shift boot - FREE with purchase
SOLD:
Spoon slotted front rotors for ITR, used, cut and ready to go - SOLD
ITR rear rotors used, can be cut - SOLD
ITR interior door handle bezels (2) with lock switch - SOLD
ITR MAP sensor - SOLD
ITR intake arm (1.5in shortened) and airbox w/ filter - SOLD
NEW Hondata Intake Manifold Gasket - for B16/ITR - SOLD
ITR oil cooler, with center "bolt" - SOLD
ITR calipers, painted red, I suggest a rebuild kit - SOLD
ITR cam gears - SOLD
ITR upper driver side engine mount bracket - SOLD even though it was FREE

ITR water pump (20K miles) - SOLD
ITR oil pump and seal (20K miles) - SOLD
ITR oil pickup - SOLD
ITR block girdle - SOLD
NEW OEM ITR throttle body gasket (new) - SOLD
OEM rear window grommet for wiper removal - SOLD
NEW Earls 1/8 NPT plug fitting to plug head oil passage - SOLD
front upper ITR control arms - SOLD
NEW OEM ITR timing belt covers (top and bottom), and lower gasket portion - SOLD
add .orig.jpg for bigger pics



Spoon rotors left, stock rears right (kinda dusty, been sitting in a box for awhile)

side view Spoons

side view rears

Modified by clip the apex at 8:29 AM 4/19/2006
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by penpen »</TD></TR><TR><TD CLASS="quote">woah... good prices...
bada-bump
</TD></TR></TABLE>
bada-bump
</TD></TR></TABLE>
Trending Topics
Those of you who are waiting for shipping quotes or for me to ship your parts, I was unable to do that today due to a Dr's appointment for my broken wrist, and now because Im going to the hospital in 45mins for emergency closed reduction surgery on that very wrist to have pins inserted. Please bear with me and allow a few days for me to recover and take care of your orders. Thanks



