Hello Honda people

I receaved the Enjo Motor mounts OE upgrade for the integra and in the kit I got had the rear mount , the top mount near the timeng belt and the top gearbox mount , now when we got to install them we noticed that the other 2 mounts (The ones you get when you buy the inserts) the front lower ones are also bad, one of them is compleatly shot .

-Is it safe for the Enjo rear mount to take the abuse without the front mounts doing the work ??
-Can the Enjo mount take the abuse or it will go bad also ??
-Sould I buy some inserts for the front ones ??

Hasport and Enjo users , tell me what you did .

Thanks very much
Marlon



Modified by Marlon88 at 9:21 PM 3/4/2005

 

anyone !!??

 

definately replace them if they are broken.

Factory will be fine, get the inserts if you want to rattle your teeth loose.

Other wise just install the 3 mounts you got, replace the broken ones with OEM goodness and enjoy the additional support

 

I've seen a set of Enjo mounts.

I wouldn't put those on ANY car that I owned.

They're the lowest quality engine mounts that I've ever seen.

 

Reid why are you saying this about Enjo mounts ? I have them in my car and they are realy great mountings. unless you tryed a set for your self you couldn`t say nothing about them .

I just receaved an E-mail from Enjo and I asked them the same question that I asked here and the reply was that I should have no problems running only 3 enjo mounts , they have tested them and they waranty them to handle up to 700hp , they also have a life time waranty.

Now I am going to add some inserts to the other 2 mounts and see what happens

Thanks guys for your help.
Marlon

 

Are most of the added vibration from the lower 2 torque mounts? I have inserts on the 2 lower, and plan on upgrading to jimfabs... I'm just wondering if it'll be too nuts adding the enjo mounts.