Benjithx

Ok, SO i have a 2000 Si with a fully built turbo charged sleeved b16a2 and a ton of other mods. I want to trade my car in on a new WRX STI, but of course as you guys well know; you can't get **** forafter market gear from dealers.

So my plan is to do a swap with a doner(probably wrecked civic, sol, or crx) engine in the SI and then sell my built block and turbo parts here. What i need to know is; what engines will be easy to swap into my SI? I don't care that it is a b-series or not just something that will get it into the dealer and run well...Oh and most important less hassle to put into my car. Any info on what engines to look for or what issues i will have with the wiring would be great. One more thing, i have a hondata chipped p28 that i would like to sell here so i plan on using the doner cars ecu. What do you guys think? thanks


Modified by Benjithx at 8:27 AM 3/23/2005

wantboost

iTrader: (2)

i've got a b16a2 shortblock you can buy

Rod.

put any d series to any b series in there

what goodies do you have for sale?

Benjithx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wantboost &raquo;</TD></TR><TR><TD CLASS="quote">i've got a b16a2 shortblock you can buy </TD></TR></TABLE>

i would need the injectors, and ecu also. pm me

adictionbass

and the head, intake, exhaust.....

Benjithx

no, just injectors and a ecu. I would just swap out the bottom end. Thats where the money is. I have a header i can use

wantboost

iTrader: (2)

pm'd

Benjithx

almost done,

I stripped out so many toys from my car it is getting kinda stupid, Thanks to wantboost i have a rock-stock b16a2, the right injectors, and a stock ecu for my old freind. This means i have a ton of stuff to sell soon and for cheap

Muckman

iTrader: (2)

That would be terrible if you didnt put the stock engine back in. Some poor unsuspecting kid buys his first car, a nice shiny Civic Si. He tries to race people but he cant figure out why its so slow until someone pops the hood and points out the D15 he has inside lol

Benjithx

stuff like
it all has about 3k miles on it and everything works perfect
(if it didn't i wouldn't sell it)


prices are rough

83mm benson b16 bottom end with cp/eagle $2200
arp head studs $80
RC 650's $250
p28 /hondata-boost $450
turbonetics t3t04b ball bearing $500
" Raptor BOV $60
" log mani $150
" evolution WG $100
matching 3" DP $50
Spearco IC (fits between EK fogs ) $250
turbonetics IC piping $75
turbo XS RFL BOV $60
2-GM three bar map sensors and one pig tail around $90
autometer cobalt boost and a/f gauges boost $100 A/F $40
EK/EM1 twin gauge dash bezel $25
obd1-obd2 harness $50
Turbo XS MBC $65
and i am sure i will think of more


Modified by Benjithx at 8:16 AM 3/23/2005


Modified by Benjithx at 8:26 AM 3/23/2005

Benjithx

400 posts

Benjithx

the list and prices are preliminary. I will soon make a thread in the sales forum with pics and stuff

andyjt

go to the junkyard and get a cheap motor. Like a d15 and put it in there! Id feel soo sorry for the dealer that bought that!

turboEGhatch

Find a cheap B16 shortblock and swap that in. The value of your SI will plummet with a D-series in it.

wantboost

iTrader: (2)

he already got my b16.

Benjithx

yeah the swap is already in full swing, now its time to rid of some gear

turboEGhatch

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wantboost &raquo;</TD></TR><TR><TD CLASS="quote">he already got my b16.</TD></TR></TABLE>

It's those stupid ads under the first post, I always think I'm the first to post now

wantboost

iTrader: (2)

yea.. i just started noticing those... it kinda pisses me off. Im like "first response... yay" then theres like 10 after it

wantboost

iTrader: (2)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Benjithx &raquo;</TD></TR><TR><TD CLASS="quote">yeah the swap is already in full swing, now its time to rid of some gear </TD></TR></TABLE>

well, you know my address is you just wanna "throw" some stuff away

hadboosttroy

i would think most dealers would not take your car, due to vin numbers not matching and mileage being off.

wantboost

iTrader: (2)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hadboosttroy &raquo;</TD></TR><TR><TD CLASS="quote">i would think most dealers would not take your car, due to vin numbers not matching and mileage being off.</TD></TR></TABLE>

well, then ill have a bill of sale drawn up, with the vin off of the block and the milage on the motor.

mrbsponge

the dealer grabbed my 99 civic Si from me, like a kid in a candy store..........and he never even popped the hood! hell the hood latch was modified and you can only open it with needle nose pliers..........................ha

the bad part, it had a 2000 gsR(poor mans ITR) in it that made almost 200 to the wheels........

wish i had droppen in an LS now

Benjithx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Benjithx &raquo;</TD></TR><TR><TD CLASS="quote">stuff like
it all has about 3k miles on it and everything works perfect
(if it didn't i wouldn't sell it)


prices are rough

83mm benson b16 bottom end with cp/eagle $2200
arp head studs $80
RC 650's $250
p28 /hondata-boost $450
turbonetics t3t04b ball bearing $500
" Raptor BOV $60
" log mani PENDING
" evolution WG $100
matching 3" DP PENDING
Spearco IC (fits between EK fogs ) $250
turbonetics IC piping PENDING
turbo XS RFL BOV $60
2-GM three bar map sensors and one pig tail around $90
autometer cobalt boost and a/f gauges boost $100 A/F $40
EK/EM1 twin gauge dash bezel $25
obd1-obd2 harness $50
Turbo XS MBC $65
and i am sure i will think of more

picks of the block will come later as i still need to pull it (hopefully tonight)

Modified by Benjithx at 8:16 AM 3/23/2005


Modified by Benjithx at 8:26 AM 3/23/2005</TD></TR></TABLE>







Modified by Benjithx at 9:01 PM 3/23/2005

Benjithx

bumpity bump

Shaun