This question is mainly about rears. The axles I'll be buying from DSS will come with the hubs. My comon sense says there shouldn't be any problems, but I thought I'd ask about using integra ones anyway. Another member told me that DSS could probably get me the hubs for the rears, and I figured that they would have to be custom and I would prefer OEM. I did search but didn't get nothing except dumb or unhelpfull responses. I know some one might say it, so I'll answer it ahead of time, no it's not just for the bling factor. I'm not sure if it is the right forum to ask this either, so mods move if it's not. Thanks in advance.


Modified by preludeserge at 3:50 PM 2/27/2005

 

yo ummm not sure but it might work

 

im VERY VERY VERY convused by your statment. first you talk about axels and then that you are talking about rear hubs.


1. front and rear hubs are 100% different

2. ITR hubs are different from 96-00 civic hubs, AKA they aren't interchangable, the hub bore is alot bigger on the ITR hubs.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slammed_93_hatch &raquo;</TD></TR><TR><TD CLASS="quote">im VERY VERY VERY convused by your statment. first you talk about axels and then that you are talking about rear hubs.


1. front and rear hubs are 100% different

2. ITR hubs are different from 96-00 civic hubs, AKA they aren't interchangable, the hub bore is alot bigger on the ITR hubs.</TD></TR></TABLE>

Sorry I didn't realize it was that confusing.

To clarify: Axels will come with the 5 lug hubs. So I don't care about the fronts. Now what I need is rear 5 lug, 5x114.3 hubs. I thought rear USDM ITR hubs will work. I guess not. I will try 5th gen prelude hubs, because I have them, but I am sure they wont work. I don't know where I can find CTR hubs (don't know what the diameter on those either), so that's out of the question too. So I quess I'll call DSS and ask them if they can make 5 lug hubs for the rear.

You answered my questions.


Modified by preludeserge at 3:54 PM 2/27/2005

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by preludeserge &raquo;</TD></TR><TR><TD CLASS="quote">

Sorry I didn't realize it was that confusing.

To clarify: Axels will come with the 5 lug hubs. So I don't care about the fronts. Now what I need is rear 5 lug, 5x114.3 hubs. I thought rear USDM ITR hubs will work. I guess not. I will try 5th gen prelude hubs, because I have them, but I am sure they wont work. I don't know where I can find CTR hubs (don't know what the diameter on those either), so that's out of the question too. So I quess I'll call DSS and ask them if they can make 5 lug hubs for the rear.

Modified by preludeserge at 3:54 PM 2/27/2005</TD></TR></TABLE>

much clearer now.

ok the 5 bolt hub will bolt on to the 96-00 spindel but the caliper mounting point on that spindel is not in the correct orentation for the 11.1" rotor/caliper combo. you need to buy some 94-01 integra spindels, RS/LS/GS/GSR doesn't matter.

Now on to the rear. if you have disk brakes it will work, if you have drums then it wont work, you will need to buy a trailing arm for rear disks.