FS: TFGG Garage Sale - Tein, JIC, Aeroquip, MSD, DSS, etc.
Thread Starter
Honda-Tech Member
iTrader: (3)
Joined: Jan 2000
Posts: 10,180
Likes: 3
From: Bloomington, IN, USA
Engine Parts
-------------------------------------------------------------------------------------
(1 set of 8 halves) ACL Race P72 Rod Bearings [std] - $25 shipped
.Used 1pr to mic, all others are untouched
.part#: 4B1925H-STD
(10) '96-'98 Acura TL Intake Manifold Studs [M8x1.25x50mm] - $8 shipped
.installed, never run, otherwise brand new
(16) OEM Honda B18C1 Retainers - $15 shipped

(8) GS-R Intake (ITR Exhaust) Inner/Outer Valve Springs - $25 shipped
(8) B-series AT Flexplate Bolts - $5 shipped
(1) '95 Integra GS-R OEM Oil Cooler - $40 shipped
.included: (2) hoses, (4) clamps, (1) through bolt, and (1) o-ring
.good condition
.96k miles
(1) '95 JDM GS-R RHD Engine Wiring Harness - $45 shipped
(2) ITR PCV Joint Tube - $5 shipped each
.both unused, one is NIB
AN Fittings & Adapters
-------------------------------------------------------------------------------------
(1) Accusump Check Valve - $15 shipped
.new, unused
(1) Earl's 1/8" NPT female coupler - $4
.part number: EAR-991001
.NIB
(1) Earl's -10AN to 1/2" NPT Tee on the Run Adapter - $10 shipped
.part number: 982610
.like new, unused
(2) Aeroquip 3/8" NPT to -10AN Flare Adapter [aluminum] - $4 each
.part number: FCM2185
.available at Summit Racing for $6.95
.one new, one used
Other Misc. Parts
------------------------------------------------------------------------------------
(1) OEM Honda 94-01 Acura Integra Car Cover & Storage Bag - $50 shipped

(13) Acura CL Open-Ended M12x1.5 Lug Nuts - $20 shipped

(1) '95 Integra Front Lug Stud
.free replacements for whomever has broken any of their's

(8) '95 Integra Rear Lug Studs - make an offer for all or any
.slightly longer than the front lug studs

(2) '95 Integra Front Shock Dust Covers [metal] - $15 shipped

(1) EM Racing DC2 Rear Trunk Bar - $100 shipped
.new and unused
.includes mounting hardware

(1) Integra GS-R ECU Guard Plate - $10 shipped

(1) ZIF Socket - $5 shipped
.purchased from moates.net for $10
.high profile (blk)
Tools
-------------------------------------------------------------------------------------
(1) Earl's AN Fitting Pressure Test Kit - $80 shipped
.part number:
.includes -3AN to -12AN
.never used

(1) Sears Craftsman Small Grey Tool Box - $7 shipped
.my very first tool box (awwww)
.plastic
.lift-out black tray
(1) Tool Shop 5gal Compressed Air Tank - $15 shipped
.like new condition
.coiled air hose with quick disconnect coupler included
.200psi max pressure
Books
-------------------------------------------------------------------------------------
(1) Race Car Aerodynamics (Designing for Speed) - $20 shipped
.author: Joseph Katz
PM me here, IM me at bchang378, or e-mail me at in_vtec@yahoo.com for questions or more pics.
I'm sure I'll dig up parts here and there as I go, so stuff changes all the time as I no longer find a use for them.
Ben
Modified by IN VTEC at 1:55 PM 3/23/2007
-------------------------------------------------------------------------------------
(1 set of 8 halves) ACL Race P72 Rod Bearings [std] - $25 shipped
.Used 1pr to mic, all others are untouched
.part#: 4B1925H-STD
(10) '96-'98 Acura TL Intake Manifold Studs [M8x1.25x50mm] - $8 shipped
.installed, never run, otherwise brand new
(16) OEM Honda B18C1 Retainers - $15 shipped

(8) GS-R Intake (ITR Exhaust) Inner/Outer Valve Springs - $25 shipped
(8) B-series AT Flexplate Bolts - $5 shipped
(1) '95 Integra GS-R OEM Oil Cooler - $40 shipped
.included: (2) hoses, (4) clamps, (1) through bolt, and (1) o-ring
.good condition
.96k miles
(1) '95 JDM GS-R RHD Engine Wiring Harness - $45 shipped
(2) ITR PCV Joint Tube - $5 shipped each
.both unused, one is NIB
AN Fittings & Adapters
-------------------------------------------------------------------------------------
(1) Accusump Check Valve - $15 shipped
.new, unused
(1) Earl's 1/8" NPT female coupler - $4
.part number: EAR-991001
.NIB
(1) Earl's -10AN to 1/2" NPT Tee on the Run Adapter - $10 shipped
.part number: 982610
.like new, unused
(2) Aeroquip 3/8" NPT to -10AN Flare Adapter [aluminum] - $4 each
.part number: FCM2185
.available at Summit Racing for $6.95
.one new, one used
Other Misc. Parts
------------------------------------------------------------------------------------
(1) OEM Honda 94-01 Acura Integra Car Cover & Storage Bag - $50 shipped

(13) Acura CL Open-Ended M12x1.5 Lug Nuts - $20 shipped

(1) '95 Integra Front Lug Stud
.free replacements for whomever has broken any of their's

(8) '95 Integra Rear Lug Studs - make an offer for all or any
.slightly longer than the front lug studs

(2) '95 Integra Front Shock Dust Covers [metal] - $15 shipped

(1) EM Racing DC2 Rear Trunk Bar - $100 shipped
.new and unused
.includes mounting hardware

(1) Integra GS-R ECU Guard Plate - $10 shipped

(1) ZIF Socket - $5 shipped
.purchased from moates.net for $10
.high profile (blk)
Tools
-------------------------------------------------------------------------------------
(1) Earl's AN Fitting Pressure Test Kit - $80 shipped
.part number:
.includes -3AN to -12AN
.never used

(1) Sears Craftsman Small Grey Tool Box - $7 shipped
.my very first tool box (awwww)
.plastic
.lift-out black tray
(1) Tool Shop 5gal Compressed Air Tank - $15 shipped
.like new condition
.coiled air hose with quick disconnect coupler included
.200psi max pressure
Books
-------------------------------------------------------------------------------------
(1) Race Car Aerodynamics (Designing for Speed) - $20 shipped
.author: Joseph Katz
PM me here, IM me at bchang378, or e-mail me at in_vtec@yahoo.com for questions or more pics.
I'm sure I'll dig up parts here and there as I go, so stuff changes all the time as I no longer find a use for them.
Ben
Modified by IN VTEC at 1:55 PM 3/23/2007
Trending Topics
Joined: Nov 2001
Posts: 12,497
Likes: 2
From: Newark/Bay Area, CA., USA
HOLY CRAP...now thats a FORSALE list! I'll be pm'ing you most likely later on for a few things
bump for my aim buddy and all this stuff is mine
2 to 6 " bore gauge
0-1" ball mic
enco mircometer stand
both welding books
2 to 6 " bore gauge
0-1" ball mic
enco mircometer stand
both welding books
deng i brought this thread back and people are buyin stuff
the MO for the 4 books will go out friday... thanks buddy
the MO for the 4 books will go out friday... thanks buddy
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NAPIER »</TD></TR><TR><TD CLASS="quote">ok, u got the 4 book the other **** is mine though thanks in vtec
</TD></TR></TABLE>
thanks...
</TD></TR></TABLE>thanks...



