2001 GSR B18C1 Engine and Tranny

(Block)
GE 84.5mm Sleeves
APR Headbolts
Wiseco Endyn Pistons and rings
Eagle Rods
ACL Bearings
Balanced and knife edged crank
Type-R Oil pump

(Head) cost me $1700 for all the parts and labor alone
Ferrea .5mm Oversize valves
Ferrea Valve Springs and Retainers
Endyn Port and Polish
Venom Cam Gears
Type-R Valve Cover

(Tranny)
Act Prolite Flywheel 8.8lb
Action 2KS Clutch
JDM Type-R LSD

Everything has 7,200 miles since new
210 across all 4
I have pics available upon request swap is ready to go

$3400 OBO








Modified by 18gTeg at 9:41 AM 2/17/2005


Modified by 18gTeg at 9:49 AM 2/17/2005


Modified by 18gTeg at 5:21 PM 2/23/2005

 

ttt

 

bump for the new pics

 

bump

 

bump for the morning

 

interested in parting withe the block? pm me if you are interested

 

no im not breaking it up

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 18gTeg &raquo;</TD></TR><TR><TD CLASS="quote">no im not breaking it up</TD></TR></TABLE>
okay if you decide to part it out let me know im looking for a built GSR block bump for you...

 

Sounds like a pretty nice setup

Does it include intake and/or exhaust manifolds?

 

1) tranny/block/head all from the same motor?

2) how long you owned the motor?

3) receipts for the head / block work?

4) What car was this in? dyno it? track times?

5) any grinds in the tranny?

6) burn / leak any oil?

7) why are you selling?

8) can you PM me the vin?

9) axles included? ECU?

10) harnesses or any hoses cut?

I'm looking to get a complete GSR swap so definitely interested.

Sorry for all the Q's. Just things I need to know before forking over months and months of savings

Bump!

 

Yea i got the stock intake manifold and exhaust manifold.

 

Bump / PM sent with more Q's:

11) What's the vtec kick in at?

12) Do you have any more pics of the completes motor from a further distance?

13) Can you take closer pics of the exhaust manifold inlets / intake manifold inlet?

14) Can you take pics of the receipts for all the work done to the motor?

15) Have you personally seen the edged knife crank? Any pics of it?

16) What kind of oil / how often changed?

17) Why did you take the harnesses off the motor? Are you going to reinstall them?

Does this include an ECU?

18) Was this motor boosted or bottle fed?

19) Has anyone on HT seen the motor in person run?

20) Exhaust mani. gasket included?

21) What's the compression for the motor?

Sorry for all the Q's again.

So, you know I am seriously looking for a swap and not just rying to waste your time:

Check the times on HT

 

^ baller

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99SlammedCivic &raquo;</TD></TR><TR><TD CLASS="quote">^ baller </TD></TR></TABLE>

Ha Ha....Bump for jonathan who's lookin to get another sick set up

 

wow.. thats a nice setup johnthan buy it!! ... also what compression is the motor? also whats cams come with the head?

 

would you consider a four door 96 teg trade for your motor

 

Stock GSR cams with Venom Cam gears

 

Bump fo this guy with cash. I'd like to see that if I were selling.

 

bump

pm'd you man!

 

ttt

 

pm sent


Modified by KENetics1 at 8:43 PM 3/17/2005