EK Power Door Lock Conversion
#1
Member
Thread Starter
Join Date: Oct 2003
Location: Far Away From You, US
Posts: 3,087
Likes: 0
Received 0 Likes
on
0 Posts
EK Power Door Lock Conversion
i have already tried searching for threads on this topic but couldn't seem to find what i needed. i have a 96 dx hatch with si doors which i bought like that and don't know what the seller did with the power locks because they're not there as my alarm installer tells me . i've been trying to figure out what is needed for this conversion first i thought all i need was the actuators, then i find out i need a module, and harnesse(s), and a floor harness. can someone please tell me everything i need and how to do the conversion please
TIA
TIA
#3
Member
Join Date: Mar 2004
Location: TEAM LIGHTSPEED, Ca, USA
Posts: 4,672
Likes: 0
Received 1 Like
on
1 Post
Re: EK Power Door Lock Conversion (JDM B16 EK)
you will need actuators and door lock module which is like a relay if you are using stock switches. if you already did the power window setup you would most likely have the floor harness already
#4
Member
Join Date: Nov 2002
Location: Far Far East Coast
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
try to do some search.
http://repo.jackmoves.com/album206
http://info.honda-tech.com/index.info/Main_Page
http://repo.jackmoves.com/album206
http://info.honda-tech.com/index.info/Main_Page
#5
Member
Thread Starter
Join Date: Oct 2003
Location: Far Away From You, US
Posts: 3,087
Likes: 0
Received 0 Likes
on
0 Posts
Re: (2lua)
thanks for you help again guys. i'm just gettin really confused cuz i people keep telling me i need more and more stuff just want to know for sure before i start buying stuff.
is this the modlue?
is this the modlue?
Trending Topics
#8
Member
Join Date: Sep 2002
Location: Eastside ATL, GA
Posts: 2,590
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Boosted96EK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted96EK »</TD></TR><TR><TD CLASS="quote">I did it in my car... check out my lil write up in my sig...</TD></TR></TABLE>
good job
you should do an "official H-T FAQ" write-up
good job
you should do an "official H-T FAQ" write-up
#10
Member
Thread Starter
Join Date: Oct 2003
Location: Far Away From You, US
Posts: 3,087
Likes: 0
Received 0 Likes
on
0 Posts
Re: (2lua)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted96EK »</TD></TR><TR><TD CLASS="quote">I did it in my car... check out my lil write up in my sig...</TD></TR></TABLE>
thanks
thanks
#12
Member
Join Date: Nov 2002
Location: Far Far East Coast
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JDM B16 EK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM B16 EK »</TD></TR><TR><TD CLASS="quote">so all that is needed is the actuators, module, and the floor harness?</TD></TR></TABLE> right, but you don't really need the floor harness. you can make the harness yourself.
#14
Member
Thread Starter
Join Date: Oct 2003
Location: Far Away From You, US
Posts: 3,087
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JDM B16 EK)
so i'm still a little confused i need to know EXACTLY what i need so far i know i need:
Actuators
Module (rely)
Door harness (do i need 1 or 2? one just one for driver side or 2 for both?)
and floor harness (would i need this if i already have my power windowns hooked up?)
is there anything else i need or should do? its going in my 96 dx hatch w/SI doors with working power windows
TIA
Actuators
Module (rely)
Door harness (do i need 1 or 2? one just one for driver side or 2 for both?)
and floor harness (would i need this if i already have my power windowns hooked up?)
is there anything else i need or should do? its going in my 96 dx hatch w/SI doors with working power windows
TIA
#17
Member
Thread Starter
Join Date: Oct 2003
Location: Far Away From You, US
Posts: 3,087
Likes: 0
Received 0 Likes
on
0 Posts
Re: (a_kaibigan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by a_kaibigan »</TD></TR><TR><TD CLASS="quote">i believe 96-98 floor harnesses and 99-00 floor harnesses are different.
so 96-98 cars have to use EX parts and 99-00 cars can use either SI or EX parts</TD></TR></TABLE>
yea i've heard this too. but don't know what to do because my car is a 96 DX with 99-00 si doors.
the 96-98 modles have the door lock modules in the driver side door while the 99-00 have them in the kick pannel in near the foot rest.
so i don't know what module and harness i need to get to get it to work
so 96-98 cars have to use EX parts and 99-00 cars can use either SI or EX parts</TD></TR></TABLE>
yea i've heard this too. but don't know what to do because my car is a 96 DX with 99-00 si doors.
the 96-98 modles have the door lock modules in the driver side door while the 99-00 have them in the kick pannel in near the foot rest.
so i don't know what module and harness i need to get to get it to work
#19
Honda-Tech Member
Re: (JDM B16 EK)
your alarm installer should be able to sell you some door lock solenoids and wire it up to the stock switch as well as your alarm, and a much cheaper price than the honda ones, and just as good
#20
Member
Thread Starter
Join Date: Oct 2003
Location: Far Away From You, US
Posts: 3,087
Likes: 0
Received 0 Likes
on
0 Posts
Re: (soundbomber)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by soundbomber »</TD></TR><TR><TD CLASS="quote">your alarm installer should be able to sell you some door lock solenoids and wire it up to the stock switch as well as your alarm, and a much cheaper price than the honda ones, and just as good</TD></TR></TABLE>
yea i'm thinking about calling it quits and doing that. because this is taking to much work eventhough OEM ones would be nice
yea i'm thinking about calling it quits and doing that. because this is taking to much work eventhough OEM ones would be nice
#21
Honda-Tech Member
Join Date: Dec 2004
Location: Bay Area, CA
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
I dont suggest getting aftermarket door actuators. they are loud as ****. the OEM ones are much nicer. If you ONLY want power door locks just get the actuators and switch. wire those and forget about the factory wiring
#22
Honda-Tech Member
Join Date: Oct 2001
Location: Edmond, OK
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
Re: (a_kaibigan)
You guys make it seem like its hard as hell. You already have the door with the power locks/windows. The lock is apart of the latch. you just have to wire your alarm to it. that's the way my 98 hatch is done.
#23
Honda-Tech Member
Join Date: Aug 2002
Location: repo.jackmoves., com, usa
Posts: 2,299
Likes: 0
Received 1 Like
on
1 Post
Re: (BuddhaSiR)
if you want a clean install then get the floor harness from a 99-00 si or ex or hx coupe. those 3 came with power windows mirrors and locks and will be a direct swap into your car. you alreay have everything inside the doors I assume so youre just going to need the floor harness and the lock module which you posted earlier. other than that you will need the power window relay, some 20 amp fuses and thats it.
http://repo.jackmoves.com/album206
http://repo.jackmoves.com/album206
#24
Member
Thread Starter
Join Date: Oct 2003
Location: Far Away From You, US
Posts: 3,087
Likes: 0
Received 0 Likes
on
0 Posts
Re: (monicle)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by a_kaibigan »</TD></TR><TR><TD CLASS="quote">I dont suggest getting aftermarket door actuators. they are loud as ****. the OEM ones are much nicer. If you ONLY want power door locks just get the actuators and switch. wire those and forget about the factory wiring</TD></TR></TABLE>
i don't want to have to get the aftermarkets either. i already have power windowns with the switch for the locks, i just need power locks. I also just orded a pair of actuators. i can wire this up to my alarm without the door lock module and floor harness? if so can you tell me how please.
i don't want to have to get the aftermarkets either. i already have power windowns with the switch for the locks, i just need power locks. I also just orded a pair of actuators. i can wire this up to my alarm without the door lock module and floor harness? if so can you tell me how please.