Okay I just bought a JDM front-end for my Integra and I need to know how to do all the Headlight wiring. I also have the bumper with the fogs on the side. How would I go about wiring these up? Any info you can give would be great. Thanks,

Ben

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">
» Search Results

Your search for JDM headlight wiring returned 21 results.

» New Search
</TD></TR></TABLE>

 

Search is your best friend.

 

Go with color to color coordianting, even if wires from Jdm headlights don't match the position of wires in stock lights... clean of grime on wires to see color...if looking at the headlights positioned on the car already from directly above wires from the outside fender inward are black, red yellow, red/green... the blinkers and fogs should be obvious. unless you have same color wiring for all wires like some backyard boogie projects..then you need electronic wire gauge

 

Anyone else?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Team Underground Teg &raquo;</TD></TR><TR><TD CLASS="quote">bumper with the fogs on the side</TD></TR></TABLE>

huh? The JDM headlights have integrated fogs, the bulb towards the middle of the car on each side.

 

I beleive I have the Euro bumper though with the second set of fogs on the wide of the bumper.

 

The Euro bumper is basically the same as the USDM bumper. Does your car look like this:



or like this:

 

No, no. I went and took a pic of the bumper:

 

bad bumper, interested in a bumper that doesnt have an integrated foglight?

 

Nope. I like this one thanks.

 

Those are not foglights, those are cornering lights, they turn on steady when you use the turn signal so that you can see the area to front and to the side of the car better when turning a corner. I don't know if those were like dealer installed accessories or what. Every once in awhile I'll see a 94-95 Accord w/ those lights in the bumper.

 

^^^Ah alright. I thought they were used in Europe for the fog so you could see around the front of your car better. Thanks.

 

wow i've never seen that before, im starting to like it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Padawan &raquo;</TD></TR><TR><TD CLASS="quote">The Euro bumper is basically the same as the USDM bumper.


</TD></TR></TABLE>
Wow me likey, anyone know where to get this bumper?

 

It's the same as the USDM bumper. It just has the UKDM fog lamps installed. Here is a thread that Dylan made about installing these fog lamps on his car: https://honda-tech.com/zerothread?id=451341

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">wow i've never seen that before, im starting to like it</TD></TR></TABLE>

I like it too. I was origanaly going to get rid of them but I like 'em. A bit more rare, especially since they came that way.