I need a flange for a custom setup.

if anyone can make or knows a place to buy one, let me know.

I need the turbo inlet flange for a precision sc61 t3/t4 turbo.

these are the requirements I need.

3/4 inch thick
stainless steel
t4 size flange
threaded t3 pattern bolt holes

if you have a mild steel 38mm WG flange, I'll buy one from you too.

Ihave paypal, let me know
thanks
William
teamshiftpoint@ev1.net

 

If you give me a print i can make it.

 

question why 3/4 thick?

 

I'll try to get a print/tracing of the turbo tomorrow.

 

I need a spacer that thick...
got a mini-me ac compatible manifold...
using it in a 00 gsr...keeping the stock rad and condensor...slim fans.
I need the flange to be 3/4" and I will turn it and get it tigged to the manifold flange to drop and position the turbo so it clears everything.

 

I also need (2) regular 3 bolt exhaust flange with 3.5" diameter hole.
mild steel
3/8 inch or whatever suggest.

 

ttt

 

I got the print of the flange...I need to get a hold of a scanner so I can get the pic scanned and uploaded.

any of you have 3/4" stock on hand to make it?

 

Dont have it on hand but can get it same day.

 

ok, emailed you the scan of the flange...let me know

 

http://img123.exs.cx/img123/50...k.jpg
its a PDF file, so right click and save as a PDF file.

 

dont understand it fully

 

understand the scan of the flange?
the flange is from a manifold, it had 2 sets of bolt holes (one for t4 and one for t3). I need the flange the same size but with only the t3 holes.

or how to download the PDF?
imageshack only let me upload image files.
just download the jpg file and then rename the file extension to *.PDF
its an acrobat PDF file.

 

up