WTT--95 hatch with h22 in NH area
Thread Starter
Joined: Dec 2002
Posts: 1,506
Likes: 1
From: manchester, nh, us
WTT--95 hatch with h22 in NH area
ok... its a clear title 95 vx.
outside- the car has full 2001 integra suspesion with type-r booster. and B+G full coilovers that cost me 1000 still have the receipt. it will also come with 00 SI wheels. and of course integra front end. i will also throw in 2 integra fenders on this deal.
inside---- integra dash and middle concil with type-r clock. integra steering column 2001 teg carpet, amber cluster. also it has jdm type-r replica seats in black
the engine is a 98 h22a4, engine has 3000 miles since i put in new type-s pistons and rings and i also replaced bearings, water pump and timing belt. head has 3 degree valve job, mild port job, and type-S cams. msd coil and brand new distributor, intake, heat wrapped dc header with custom bend exhaust . also uberdata socketed p28 ecu. this engine put down 190 WHP with very little tunning. low 13 sec car here ladies.
i have more pix but i dont know how to resize them. they are very big.
im going to school full time this semester so i need to travel 40 miles each way sometimes twice a day. i would be putting miles like crazy on this thing it would be a waste of a swap.
i need an EK hatch for a trade.......... or cash always works too
or any clear title bike 00 up
Modified by H23vtecEG at 2:03 PM 1/25/2005
outside- the car has full 2001 integra suspesion with type-r booster. and B+G full coilovers that cost me 1000 still have the receipt. it will also come with 00 SI wheels. and of course integra front end. i will also throw in 2 integra fenders on this deal.
inside---- integra dash and middle concil with type-r clock. integra steering column 2001 teg carpet, amber cluster. also it has jdm type-r replica seats in black
the engine is a 98 h22a4, engine has 3000 miles since i put in new type-s pistons and rings and i also replaced bearings, water pump and timing belt. head has 3 degree valve job, mild port job, and type-S cams. msd coil and brand new distributor, intake, heat wrapped dc header with custom bend exhaust . also uberdata socketed p28 ecu. this engine put down 190 WHP with very little tunning. low 13 sec car here ladies.
i have more pix but i dont know how to resize them. they are very big.
im going to school full time this semester so i need to travel 40 miles each way sometimes twice a day. i would be putting miles like crazy on this thing it would be a waste of a swap.
i need an EK hatch for a trade.......... or cash always works too
or any clear title bike 00 up
Modified by H23vtecEG at 2:03 PM 1/25/2005
Thread Starter
Joined: Dec 2002
Posts: 1,506
Likes: 1
From: manchester, nh, us
Re: WTT--95 hatch with h22 in NH area (Cliffjumper2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cliffjumper2 »</TD></TR><TR><TD CLASS="quote">are you only interested in a stock hatch in trade?</TD></TR></TABLE>
is it an ek?
is it an ek?
Re: WTT--95 hatch with h22 in NH area (H23vtecEG)
how about my integra for a trade.
https://honda-tech.com/zerothread?id=1103964
https://honda-tech.com/zerothread?id=1103964
Thread Starter
Joined: Dec 2002
Posts: 1,506
Likes: 1
From: manchester, nh, us
Re: WTT--95 hatch with h22 in NH area (Robs_B20b)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Robs_B20b »</TD></TR><TR><TD CLASS="quote">how about my integra for a trade.
https://honda-tech.com/zerothread?id=1103964</TD></TR></TABLE>
my friend has 3 2nd gen integras. never realy liked the way they looked. sorry good luck with your sale
https://honda-tech.com/zerothread?id=1103964</TD></TR></TABLE>
my friend has 3 2nd gen integras. never realy liked the way they looked. sorry good luck with your sale
Trending Topics
Thread Starter
Joined: Dec 2002
Posts: 1,506
Likes: 1
From: manchester, nh, us
Re: (coachkellum)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by coachkellum »</TD></TR><TR><TD CLASS="quote">that thing is terrible, all confused 
</TD></TR></TABLE>
well you can be like every else. cf hood and lip. you have every other kid out there with the same looking hatch cause they are trying to be jdm . something different plus its my damn car and i like it. so get off my thread what a ******* moron. this aint the appearence section compadre
</TD></TR></TABLE>well you can be like every else. cf hood and lip. you have every other kid out there with the same looking hatch cause they are trying to be jdm
. something different plus its my damn car and i like it. so get off my thread what a ******* moron. this aint the appearence section compadre
Honda-Tech Member
Joined: Mar 2003
Posts: 5,285
Likes: 0
Re: (coachkellum)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by coachkellum »</TD></TR><TR><TD CLASS="quote">that thing is terrible, all confused </TD></TR></TABLE>
i don't see the seller asking for your opinion anywhere in this thread. way to be a waste of space.
</TD></TR></TABLE>i don't see the seller asking for your opinion anywhere in this thread. way to be a waste of space.
Thread Starter
Joined: Dec 2002
Posts: 1,506
Likes: 1
From: manchester, nh, us
Re: (usdmPC3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by usdmPC3 »</TD></TR><TR><TD CLASS="quote">
i don't see the seller asking for your opinion anywhere in this thread. way to be a waste of space.</TD></TR></TABLE>
i know huh. maybe he can give me his adress so i can run him over with it
Thread Starter
Joined: Dec 2002
Posts: 1,506
Likes: 1
From: manchester, nh, us
Re: WTT--95 hatch with h22 in NH area (hybridvisionz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybridvisionz »</TD></TR><TR><TD CLASS="quote">hey i like the track picture looking good i remember you at import wars </TD></TR></TABLE>
yah i got a crap load of pix from that day. you know anyonw in mass that wants this or wants to trade?
yah i got a crap load of pix from that day. you know anyonw in mass that wants this or wants to trade?
Thread Starter
Joined: Dec 2002
Posts: 1,506
Likes: 1
From: manchester, nh, us
Re: WTT--95 hatch with h22 in NH area (hybridvisionz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybridvisionz »</TD></TR><TR><TD CLASS="quote">you want a stock ek or with mods?</TD></TR></TABLE>
dont matter
dont matter
Thread Starter
Joined: Dec 2002
Posts: 1,506
Likes: 1
From: manchester, nh, us
Re: (l3oostedmax)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by l3oostedmax »</TD></TR><TR><TD CLASS="quote">just out of curiousity, did that integra front just bolt right on? fenders,hood, and front? did you need to "customise" anything?</TD></TR></TABLE>
welded new radiator suuport from integra changed wiring over for headlights and turn signals, and cut and welded integra civic fenders together. those sets were only practice i have a new set of fenders that will get cut soon. the front end is done right though everything lines up good
welded new radiator suuport from integra changed wiring over for headlights and turn signals, and cut and welded integra civic fenders together. those sets were only practice i have a new set of fenders that will get cut soon. the front end is done right though everything lines up good