sup fellas, juss wondering but can the DC2 (integra) or EK9 air cleaner/filter bolt onto a b16a3 Cold air tubing or is it juss mainly for short ram induction? It seems to me that the DC2 filter will fit onto a cold air tubing due to the fact that it has that tradtional "cone shaped" intake design. As for the The EK4,9 and EG1,2,4,5,6 how does that intake work out? is it bolted on to the "stock tubing" as well? is it wide in dimensions so it will be able to fit nicely around the tubing of the intake? and if so, would i be able to fit this on my cold air?

well basically to make a long story short, i believe that a DC2 Spoon air cleaner/filter will bolt on to my CAI due to the tradtional cone shaped....do u guys agree?

and, for the EK fitlers and EG filters, is it wide in dimesnions and comes in its own intake box in order for it to fit around the circular piping or are they skinny and thin so they would have to fit inside the stock intake box?
here's a website......(for some reason the eg's and ek's don' look connected =D )

http://www.spoon.jp/eng/products/lineup.html

if u can answer these questions, thanx fellas....juss click onto "spoon air cleaners"
__________________________

SA_SoL ChYLD
-B16a3 Soon To Be Type R'ed The Shiz Out-

 

my b16a3's intake pipe that came stock in my del sol did not fit the dc2 mugen intake, I had to replace it with a dc2 intake pipe. assuming that spoon n mugen filters are similar

 

i understand, but i was wondering if it'll fit on a and aftermarket piping, i wanna do this on a cold air...

 

ALSO LETTING U GUYZ NO...I AM NOT REPEATING POSTS, IM JUSS REPLYING AND IT JUSS SO HAPPENS TO CONNECT MEEH TO THE FIRST POST ON THE MESSAGE BOARD..

 

Why don't you jut buy a K&N filter? Spoon designed their filters around the stock airbox.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SA_SoLcHyLD &raquo;</TD></TR><TR><TD CLASS="quote">i understand, but i was wondering if it'll fit on a and aftermarket piping, i wanna do this on a cold air...</TD></TR></TABLE>

measure your aftermarket piping, this should tell you if it will fit