FS: "LOTS OF PICTURES " Thermal, DC, Racing Cat, APEXI, Zex Dry Nitrous Kit, AEM
I have had these items inside my garage for sometime now, and I feel it is time to get rid of them. I would like to see some one on HT get a chance to buy these items befor I but them on Ebay. I feel these would be great gifts for the Holidays or just another add-on to the list of items that you already have on your car. I feel the prices are set at a reasonable price, so please do not low-ball me. If you would like to buy more then one item at a time we might be able to work something out. It all depends on what the items are. All of the parts came off a 2000 Integra. These items will fit a (GSR Not sure on some), RS, ITR, and LS. They have about 10K miles on them- some a lot less. I would have to say the condition of the items are Good that is being totally honest because some might say that they are closer to new. The car that they came off of was a show car, so the parts were well maintained. The reason for getting rid of is the car is no longer.
List of Items:
Thermal 2.25 inch full exhaust for the cat back no rust starting to change to a copper color some spots 8K miles on. -->Sold to turb0gsr3
DC header (Jet Hot Coated) 4-1 10K miles on. --> SOLD
Racing Cat + Cover 2.25 (Straight Pipe) 8K miles on... Sale pending to turb0gsr3
Apexi Vtec Controller VAFC... Sale pending to turb0gsr3
Zex Dry Nitrous Kit - Only 5 fills still half in the bottle. -->sold to RedlineRex
Heater
Nitrous Gauge
Bottle Gauge
Bottle line/gauge splitter
Extra lines
Extra hose
Extra clamps
Extra wire
POLISHED BOTTLE
Only 75 shot
To obtain different shot sizes (pills) you can go to any real speed shop and they will only cost about $5.00 at most for all of them.
AEM cold air intake 3 inch (POLISHED) 8K miles on + By Pass 0 miles on and will throw in for free if I can find it. Important I do not know if this item will fit on a GSR unless an aftermarket intake manifold (ie. Skunk2 or Type R) has been installed. If interested in item and have a GSR please see if it will fit. I had a Skunk2 manifold so it worked for me. Manifold was given to another person (Do not have it any more.) If someone buys this or is interested in this, I will look around the garage for it and tell you if I still have it or not, I know it is some where. If I do not find it when item sells and I find it later I will send it to the persons that bought it from me. There is a hole in the pipe were the nitrous line goes in at, but I have a plug for it. -->$125.00 + Shipping
Volts Gauge. --> SOLD TO rieki
Here are some pictures on the items. If you would like more just drop me a line and I will e-mail them to you. I will send as many as you like, or I will add them to this post if you like.
Thanks for looking.
Thermal 2.25 inch full exhaust for the cat back no rust starting to change to a copper color in some spots 8K miles on. -->Sold to turb0gsr3




DC header (Jet Hot Coated) 4-1 10K miles on. --> SOLD


Racing Cat + Cover 2.25 (Straight Pipe) 8K miles on... Sale pending to turb0gsr3

Apexi Vtec Controller VAFC... Sale pending to turb0gsr3

Zex Dry Nitrous Kit 5 fills still half in the bottle. -->SOLD
Heater
Nitrous Gauge
Bottle Gauge
Bottle line/gauge splitter
Extra lines
Extra hose
Extra clamps
Extra wire
Polished Bottle
Only 75 shot








AEM cold air intake 3"inch (polished) 8K miles on + By Pass 0 miles on will give for free if I can find it. $125.00 + Shipping

Volts Gauge. --> SOLD TO rieki
SOLD TO rieki
Thanks for looking....
Modified by mstyper at 10:59 PM 1/13/2005
List of Items:
Thermal 2.25 inch full exhaust for the cat back no rust starting to change to a copper color some spots 8K miles on. -->Sold to turb0gsr3
DC header (Jet Hot Coated) 4-1 10K miles on. --> SOLD
Racing Cat + Cover 2.25 (Straight Pipe) 8K miles on... Sale pending to turb0gsr3
Apexi Vtec Controller VAFC... Sale pending to turb0gsr3
Zex Dry Nitrous Kit - Only 5 fills still half in the bottle. -->sold to RedlineRex
Heater
Nitrous Gauge
Bottle Gauge
Bottle line/gauge splitter
Extra lines
Extra hose
Extra clamps
Extra wire
POLISHED BOTTLE
Only 75 shot
To obtain different shot sizes (pills) you can go to any real speed shop and they will only cost about $5.00 at most for all of them.
AEM cold air intake 3 inch (POLISHED) 8K miles on + By Pass 0 miles on and will throw in for free if I can find it. Important I do not know if this item will fit on a GSR unless an aftermarket intake manifold (ie. Skunk2 or Type R) has been installed. If interested in item and have a GSR please see if it will fit. I had a Skunk2 manifold so it worked for me. Manifold was given to another person (Do not have it any more.) If someone buys this or is interested in this, I will look around the garage for it and tell you if I still have it or not, I know it is some where. If I do not find it when item sells and I find it later I will send it to the persons that bought it from me. There is a hole in the pipe were the nitrous line goes in at, but I have a plug for it. -->$125.00 + Shipping
Volts Gauge. --> SOLD TO rieki
Here are some pictures on the items. If you would like more just drop me a line and I will e-mail them to you. I will send as many as you like, or I will add them to this post if you like.
Thanks for looking.
Thermal 2.25 inch full exhaust for the cat back no rust starting to change to a copper color in some spots 8K miles on. -->Sold to turb0gsr3




DC header (Jet Hot Coated) 4-1 10K miles on. --> SOLD


Racing Cat + Cover 2.25 (Straight Pipe) 8K miles on... Sale pending to turb0gsr3

Apexi Vtec Controller VAFC... Sale pending to turb0gsr3

Zex Dry Nitrous Kit 5 fills still half in the bottle. -->SOLD
Heater
Nitrous Gauge
Bottle Gauge
Bottle line/gauge splitter
Extra lines
Extra hose
Extra clamps
Extra wire
Polished Bottle
Only 75 shot








AEM cold air intake 3"inch (polished) 8K miles on + By Pass 0 miles on will give for free if I can find it. $125.00 + Shipping

Volts Gauge. --> SOLD TO rieki
SOLD TO rieki Thanks for looking....
Modified by mstyper at 10:59 PM 1/13/2005
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LiTtOGPiMp »</TD></TR><TR><TD CLASS="quote">how much for shipping on the header to 98178?</TD></TR></TABLE>
Just a guess I do not have it in a box yet but the http://www.usps.com came up with $122.00 I will find a cheeper waygive me a day or two.
Just a guess I do not have it in a box yet but the http://www.usps.com came up with $122.00 I will find a cheeper waygive me a day or two.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SlipAngleX »</TD></TR><TR><TD CLASS="quote">where you located? and is the exhaust for a coupe? sedan?</TD></TR></TABLE>
Coupe
East Cost
Coupe
East Cost


