GEar Ratio selection HELP!!!!!!
12-30-2001, 02:57 PM
#1
New User
Thread Starter
Join Date: Jul 2001
Location: Santa Barbra, CA, USA
Posts: 1,523
Likes: 0
Received 0 Likes
on
0 Posts
GEar Ratio selection HELP!!!!!!
I have a chance to swap out the gear's in my tranny this month and I was wondering if I could get your guy's HELP 
Here's my options
TRANNY Gear set#1
1)2.53
2)1.94
3)1.59
4)1.28
5)1.03
Final drive of 4.4
Tranny#2
1)std
2)std
3)1.68
4)1.33
5)1.00
final drive of 4.4
And this car would used for 1/4 mile and Auto X
TIA
Here's my options
TRANNY Gear set#1
1)2.53
2)1.94
3)1.59
4)1.28
5)1.03
Final drive of 4.4
Tranny#2
1)std
2)std
3)1.68
4)1.33
5)1.00
final drive of 4.4
And this car would used for 1/4 mile and Auto X
TIA
12-31-2001, 02:28 PM
#4
Honda-Tech Member
Re: GEar Ratio selection HELP!!!!!! (JDM_DOHC_SiR)
Goto: http://www.autocrossing.com/cgi-bin/gearcalc.cgi
Mix and match all you want and figure out some of the results.
Good luck,
A.
PS what if you just did an ATS 4.929 FD and light weight flywheel?
Mix and match all you want and figure out some of the results.
Good luck,
A.
PS what if you just did an ATS 4.929 FD and light weight flywheel?
12-31-2001, 02:42 PM
#5
New User
Thread Starter
Join Date: Jul 2001
Location: Santa Barbra, CA, USA
Posts: 1,523
Likes: 0
Received 0 Likes
on
0 Posts
Re: GEar Ratio selection HELP!!!!!! (1GreyTeg)
PS what if you just did an ATS 4.929 FD and light weight flywheel?
...But I would love to use the ATS unit.... but I have a cable trans 
BTW thanks for the Sit im going to try it now
Thread
Thread Starter
Forum
Replies
Last Post
sk8shorty012
Transmission & Drivetrain
19
07-13-2010 06:45 PM
feelths
Road Racing / Autocross & Time Attack
9
04-28-2004 10:41 AM
