NA to Boost, Dyno numbers on 7psi

Thread Tools
 
Search this Thread
 
Old Nov 15, 2004 | 10:50 AM
  #1  
AzG35's Avatar
Thread Starter
Member
 
Joined: Feb 2002
Posts: 1,867
Likes: 1
From: T Town, G35Land
Default NA to Boost, Dyno numbers on 7psi

Well, I made the changeover from NA to boost this weekend. My motor is a poor man's type-R. Originally it made 200hp and 137 torque NA with 12.0:1 CR. I decided I was done with it so I changed over. I added a Cometic .074" head gasket to drop the compression to about 10.5:1 CR and threw in a set of GSR cams instead of the Skunk Stage 1's I had. Unfortunately I left the dyno sheet at home, I will post it tonight. Here is the setup now:

B18C1 block, JE pistons, GSR rods w/ ARP rod bolts
B16A head, ported/polished, GSR cams
Cometic .074" head gasket, total compression ~10.5:1
Garrett T3/T04e 50 trim, .63 A/R turbo
Tial 38mm wastegate
Revhard manifold and 2.5" downpipe
Kteller 2.5" catback (2.5" magnaflow muffler and resonator)
Spoolin Performance I/C piping
6" JohnnyRacecar intercooler
Greddy TypeS BOV
TurboXS MBC
Lucas 440cc injectors
Walbro 255lph fuel pump
AEM FPR
Hondata s200b

On 7psi I ended up putting down 261hp and 191 torque on 91 octane on full exhaust. I will get the graph up later. Injectors are maxxed out (90-93%) I need to get at least 550's or higher. Fuel pressure is up there too ~60psi A/F was tuned to a conservative 11.5:1 due to the high compression. Timing was about 22-23 degrees. I am going to go with bigger injectors and up the boost later. Do these numbers sound about right?

Edit: Here is the graph compared to my all motor numbers. There is a slight dip in the 6500-7000 area for some reason. A/F looked good there and so did timing. Kinda weird.



Put some RC750's in and bumped the boost up to 10psi. Pulled 301hp and 230 torque.


Modified by AzSi22 at 12:49 AM 11/25/2004
Reply
Old Nov 15, 2004 | 10:51 AM
  #2  
FOrSfEd's Avatar
Member
 
Joined: May 2002
Posts: 3,719
Likes: 0
From: TurBlowVille, SC, USA
Default Re: NA to Boost, Dyno numbers on 7psi (AzSi22)

not to bad on the low boost, turn it up a lil more and you should be over 300 easy.
Reply
Old Nov 15, 2004 | 10:52 AM
  #3  
-iLLuZioN-B18C1's Avatar
Honda-Tech Member
 
Joined: Apr 2002
Posts: 2,395
Likes: 0
Default Re: NA to Boost, Dyno numbers on 7psi (AzSi22)

i say those are nice numbers!!
compression makes a world of a difference

i say those numbers sounds about right for your setup
Reply
Old Nov 15, 2004 | 10:56 AM
  #4  
fast94ex's Avatar
 
Joined: Jan 2004
Posts: 141
Likes: 0
From: Denham Springs, LA, USA
Default Re: NA to Boost, Dyno numbers on 7psi (-iLLuZioN-B18C1)

Reply
Old Nov 15, 2004 | 11:08 AM
  #5  
RobbieG35's Avatar
12 Years Strong
 
Joined: Apr 2003
Posts: 6,079
Likes: 0
From: South Carolina
Default Re: NA to Boost, Dyno numbers on 7psi (fast94ex)

Any pics of the car?
Reply
Old Nov 15, 2004 | 11:14 AM
  #6  
AzG35's Avatar
Thread Starter
Member
 
Joined: Feb 2002
Posts: 1,867
Likes: 1
From: T Town, G35Land
Default Re: NA to Boost, Dyno numbers on 7psi (HybridHatch88)

Here is the most recent pic:



With the I/C in, you can't tell. The only thing that gives it away is the I/C piping because I had to cut the bumper some for the piping to clear.
Reply
Old Nov 15, 2004 | 11:16 AM
  #7  
mattEG's Avatar
Honda-Tech Member
 
Joined: Mar 2004
Posts: 298
Likes: 0
From: Soviet Canuckistan
Default

That car is ******* sexy! Nice!
Reply
Old Nov 15, 2004 | 11:16 AM
  #8  
RobbieG35's Avatar
12 Years Strong
 
Joined: Apr 2003
Posts: 6,079
Likes: 0
From: South Carolina
Default Re: NA to Boost, Dyno numbers on 7psi (AzSi22)

Looks good
Reply
Old Nov 15, 2004 | 11:18 AM
  #9  
project dc2's Avatar
iTrader: (1)
 
Joined: Nov 2001
Posts: 45,428
Likes: 0
From: 43257 Osgood Rd. Fremont, CA 94539
Default Re: NA to Boost, Dyno numbers on 7psi (AzSi22)

looks good
Reply
Old Nov 15, 2004 | 11:23 AM
  #10  
BoostedsiR's Avatar
 
Joined: Mar 2003
Posts: 1,082
Likes: 0
From: Hartbeat, CT
Default Re: NA to Boost, Dyno numbers on 7psi (project dc2)

looks good and good numbers on low boost. crank that **** up
Reply
Old Nov 15, 2004 | 11:51 AM
  #11  
hybrid93SIvic's Avatar
Honda-Tech Member
 
Joined: Aug 2003
Posts: 1,618
Likes: 0
From: Tucson, AZ, USA
Default Re: NA to Boost, Dyno numbers on 7psi (BoostedsiR)

adam...nice numbers....i will sell you my 550's...they used to be yours....brand new...$250
Reply
Old Nov 15, 2004 | 11:51 AM
  #12  
AzG35's Avatar
Thread Starter
Member
 
Joined: Feb 2002
Posts: 1,867
Likes: 1
From: T Town, G35Land
Default Re: NA to Boost, Dyno numbers on 7psi (BoostedsiR)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BoostedsiR &raquo;</TD></TR><TR><TD CLASS="quote">looks good and good numbers on low boost. crank that **** up </TD></TR></TABLE>

I will, once I get some 650cc or 750cc injectors
Reply
Old Nov 15, 2004 | 11:52 AM
  #13  
hybrid93SIvic's Avatar
Honda-Tech Member
 
Joined: Aug 2003
Posts: 1,618
Likes: 0
From: Tucson, AZ, USA
Default Re: NA to Boost, Dyno numbers on 7psi (AzSi22)

well n/m on the 550's then....
Reply
Old Nov 15, 2004 | 11:54 AM
  #14  
boostjunkie757's Avatar
Honda-Tech Member
 
Joined: Nov 2003
Posts: 1,610
Likes: 0
From: good bye va...hello florida!!
Default

odd....

im running RC440's on a stock ITR turbo with a headgasket at 9.1:1 and on 7psi i put down 307 to the wheels...


you say your 440's are maxed? imagine how mine feel....
Reply
Old Nov 15, 2004 | 11:59 AM
  #15  
AzG35's Avatar
Thread Starter
Member
 
Joined: Feb 2002
Posts: 1,867
Likes: 1
From: T Town, G35Land
Default Re: (boostjunkie757)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostjunkie757 &raquo;</TD></TR><TR><TD CLASS="quote">odd....

im running RC440's on a stock ITR turbo with a headgasket at 9.1:1 and on 7psi i put down 307 to the wheels...


you say your 440's are maxed? imagine how mine feel....</TD></TR></TABLE>

My duty cycle was close to 100% at one point when my car was still in the high 10's in A/F. I also tuned to 11.4-11.5:1 CR to be safe. I'm sure there is more HP just from going a bit leaner, but I don't want to push it yet.
Reply
Old Nov 15, 2004 | 12:01 PM
  #16  
DanishR's Avatar
Honda-Tech Member
 
Joined: Sep 2002
Posts: 804
Likes: 0
From: Lyngby/Denmark, Denmark
Default Re: (boostjunkie757)

Do you like the way the car drives with boost? Sure it has more power, but what about lag? Could you do a little NA to Boost review?
Reply
Old Nov 15, 2004 | 12:02 PM
  #17  
hybrid93SIvic's Avatar
Honda-Tech Member
 
Joined: Aug 2003
Posts: 1,618
Likes: 0
From: Tucson, AZ, USA
Default Re: (DanishR)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DanishR &raquo;</TD></TR><TR><TD CLASS="quote">Do you like the way the car drives with boost? Sure it has more power, but what about lag? Could you do a little NA to Boost review? </TD></TR></TABLE>
his car was insanely fast to begin with....i am sure it is a lot more fun now though
Reply
Old Nov 15, 2004 | 12:05 PM
  #18  
RobbieG35's Avatar
12 Years Strong
 
Joined: Apr 2003
Posts: 6,079
Likes: 0
From: South Carolina
Default Re: (DanishR)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DanishR &raquo;</TD></TR><TR><TD CLASS="quote">Do you like the way the car drives with boost? Sure it has more power, but what about lag? Could you do a little NA to Boost review? </TD></TR></TABLE>

Turbo lag is way overblown, sure you have to wait a second for the power, but when it comes in nothing compares to it
Reply
Old Nov 15, 2004 | 12:07 PM
  #19  
hybrid93SIvic's Avatar
Honda-Tech Member
 
Joined: Aug 2003
Posts: 1,618
Likes: 0
From: Tucson, AZ, USA
Default Re: (HybridHatch88)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HybridHatch88 &raquo;</TD></TR><TR><TD CLASS="quote">

Turbo lag is way overblown, sure you have to wait a second for the power, but when it comes in nothing compares to it</TD></TR></TABLE>

couldn't have been said any better....bump for another boosted honda in tucson
Reply
Old Nov 15, 2004 | 12:07 PM
  #20  
nonvtecD's Avatar
Honda-Tech Member
20 Year Member
 
Joined: Sep 2003
Posts: 1,737
Likes: 3
From: Watertown, CT, USA
Default

Nice, welcome to the dark side
Reply
Old Nov 15, 2004 | 12:11 PM
  #21  
JakeB.'s Avatar
Photography Pundit
 
Joined: Jun 2002
Posts: 4,414
Likes: 0
From: Bradenton, FL
Default Re: (DanishR)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DanishR &raquo;</TD></TR><TR><TD CLASS="quote">Do you like the way the car drives with boost? Sure it has more power, but what about lag? Could you do a little NA to Boost review? </TD></TR></TABLE>

interested in seeing a little review also

very sexy car
Reply
Old Nov 15, 2004 | 12:15 PM
  #22  
AzG35's Avatar
Thread Starter
Member
 
Joined: Feb 2002
Posts: 1,867
Likes: 1
From: T Town, G35Land
Default Re: (DanishR)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DanishR &raquo;</TD></TR><TR><TD CLASS="quote">Do you like the way the car drives with boost? Sure it has more power, but what about lag? Could you do a little NA to Boost review? </TD></TR></TABLE>

Definately different type of power. NA, the car was super responsive and very linear. With this setup, there isn't a whole lot of lag, the reason I got a 50 trim instead of a 57 or 60. Basically, if I stomp it from a very slow roll, the turbo will start spooling around 2800, 5psi by 3200rpms, 6psi by 3500, 7psi by 4000. The car just rips the tires in 1st and 2nd. The car pulls hard in 3rd, actually haven't gotten into 4th yet. Overall a

I'm sure I'll have another NA car eventually though
Reply
Old Nov 15, 2004 | 12:19 PM
  #23  
RobbieG35's Avatar
12 Years Strong
 
Joined: Apr 2003
Posts: 6,079
Likes: 0
From: South Carolina
Default Re: (AzSi22)

So which do you like better?
Reply
Old Nov 15, 2004 | 12:22 PM
  #24  
11psiTurboSI's Avatar
Member
 
Joined: Feb 2003
Posts: 6,004
Likes: 0
From: Minnesota
Default Re: (HybridHatch88)

nice #'s
Reply
Old Nov 15, 2004 | 12:23 PM
  #25  
AzG35's Avatar
Thread Starter
Member
 
Joined: Feb 2002
Posts: 1,867
Likes: 1
From: T Town, G35Land
Default Re: (HybridHatch88)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HybridHatch88 &raquo;</TD></TR><TR><TD CLASS="quote">So which do you like better? </TD></TR></TABLE>

NA for simplicity
Boost for all out power and speed
Reply



All times are GMT -8. The time now is 06:51 PM.