Thought I'd post up some pics of the Turbo LS. Sleeper to you?
Where's that front mount?

Yes those are steelies with EX hub caps.

The sun was pissing me off, couldn't get all the gauges
Custom fab'd the vent




everything custom, from fabrication of the downpipe, intercooler piping. Chipped my own ECU, running on Uberdata.
you guys like?


Yes those are steelies with EX hub caps.


The sun was pissing me off, couldn't get all the gauges

Custom fab'd the vent





everything custom, from fabrication of the downpipe, intercooler piping. Chipped my own ECU, running on Uberdata.
you guys like?
well it's kind of hard to be a sleeper with a turbo exhaust note comming out of twin tips but it's a good start for sure
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jeiden »</TD></TR><TR><TD CLASS="quote">sleeper
</TD></TR></TABLE>
</TD></TR></TABLE>
Trending Topics
its kind of loud I guess. Nobody I've ever raced has ever asked me once if it was turbo'd. They just assumed it was a built *** LS.
Looks great
I have an off-topic question for you... I don't mean to hi-jack your thread or anything!
But, I noticed in the picture that you have of your turbo that it seems like your cartridge is tilted back a bit...

Is it tilted off center? If so, have you had any problems with the turbo getting lubrication?
The reason I ask is, my turbo/manifold set up is such that I cannot position my oil inlet in a completely vertical position, it has to be tilted back a bit....


I have been wondering if this is going to give me any problems in the future or not...
Thanks for your help! (I'll delete this post if you don't want the off-topic-ness of it in your thread.)
I have an off-topic question for you... I don't mean to hi-jack your thread or anything!
But, I noticed in the picture that you have of your turbo that it seems like your cartridge is tilted back a bit...

Is it tilted off center? If so, have you had any problems with the turbo getting lubrication?
The reason I ask is, my turbo/manifold set up is such that I cannot position my oil inlet in a completely vertical position, it has to be tilted back a bit....


I have been wondering if this is going to give me any problems in the future or not...
Thanks for your help! (I'll delete this post if you don't want the off-topic-ness of it in your thread.)




