99 Civic Si Maretta, GA -MINT ROLLNG CHASIS-
Guest
Posts: n/a
99 Civic Si Maretta, GA -MINT ROLLNG CHASIS-
PLEASE READ THIS FOR FULL STORY /W PICTURES
<FONT SIZE="4">TESTING WATERS: ROLLING CHASIS</FONT>
Willing to trade, but I am not very motivated in trading/selling the chasis because I know this car's the perfect canidate for a good build. ALL SHE NEEDS IS A MOTOR I have good internals for sale as well. But I am 750miles away and it's not like I can work on the car so entertain me with offers.
Clean title! 2nd owner; 1st owner was a local acquaintance of mine.
Very, very well taken care of it's whole life, like I said, I knew the guy before owning the car as mine, I wouldn't buy it if I knew it wasn't immaculate.
Repainted Feburary, 04 to milano red (R81) from bumper to bumper, cost 5.5grand, I have paperwork to prove.
seen little rain and snow by accident, garaged every night of her life.
<U>Exterior:</U>
Full OEM lip kit
OEM spoiler
OEM fog lights /w red bezels
CTR headlamps
JDMShit.com CF hood
<U>Interior:</U>
Red Sparco Speeds with Red 4pt Sparco harness
Kenwood 50x4 CD player
Spoon Shift **** /w CTR boot
<U>Suspension:</U>
Brembo rotors and PBR Ultimate pads on all corners
TEIN SS
Konig Heliums on +95% Azenis (used for about 500miles)
Skunk2 extended lug nuts
Comptech front upper strut bar
<U>Engine:</U>
JUN satge III shafts on AEM gears
PR3 complete head slighty touched by piston
JUN vavle springs /w Corwer TI retainers
Skunk2 B16/b18c5 intake manifold
ITR +2mm bored by maxbore.com TB
ES motor mount insert / placeracing driver's side motor mount
OBD2 engine harness + dizzy
CTR N1 Crank Pulley
AEM CAI
AEM fuel rail /w B&M FPR and gauge
JDM 4-1 ITR header
2.5 inlet/outlet testpipe /w 2.5 side-dump
DC Sports SS Exhaust
B18c1 with a hole in 3rd cylinder, will include original B16a2 bottom end taken out with 65,000miles for slightly extra.
Greddy oil catch can
B16a2 hydro tranny
ACT Xtreme clutch kit less than 6 months of use
JUN UL flywheel
Wlabro 255Hi pump
no AC no PS
<U>ECU:</U>
p28 flashed for JUN stage III cams. (This is the real deal, not a chip, complete reflash by JUN of Japan)
OBD2->1 harness
Apexi VAFC-1
Apexi RSM
<U>Chasis pics:</U>
EVERYTHING IS LOCATED IN MARIETTA, GA!
I will be going down there November 20th to visit my family for Thanksgiving week (I live in Chicago)
I can ship parts out then or if you're local I can meet up.
Find vouches in sig.
AIM: SpoonSport12
Since I never sold a rolling chasis before, no price is qouted yet.
Vin will be given to mod upon request on both chasis and motor(s) - It will just take some time since I'm in Chicago.
Thanks.
Modified by Louie_EM1 at 2:32 AM 10/31/2004
Modified by Louie_EM1 at 2:52 AM 10/31/2004
Modified by Louie_EM1 at 4:50 AM 10/31/2004
<FONT SIZE="4">TESTING WATERS: ROLLING CHASIS</FONT>
Willing to trade, but I am not very motivated in trading/selling the chasis because I know this car's the perfect canidate for a good build. ALL SHE NEEDS IS A MOTOR I have good internals for sale as well. But I am 750miles away and it's not like I can work on the car so entertain me with offers.
Clean title! 2nd owner; 1st owner was a local acquaintance of mine.
Very, very well taken care of it's whole life, like I said, I knew the guy before owning the car as mine, I wouldn't buy it if I knew it wasn't immaculate.
Repainted Feburary, 04 to milano red (R81) from bumper to bumper, cost 5.5grand, I have paperwork to prove.
seen little rain and snow by accident, garaged every night of her life.
<U>Exterior:</U>
Full OEM lip kit
OEM spoiler
OEM fog lights /w red bezels
CTR headlamps
JDMShit.com CF hood
<U>Interior:</U>
Red Sparco Speeds with Red 4pt Sparco harness
Kenwood 50x4 CD player
Spoon Shift **** /w CTR boot
<U>Suspension:</U>
Brembo rotors and PBR Ultimate pads on all corners
TEIN SS
Konig Heliums on +95% Azenis (used for about 500miles)
Skunk2 extended lug nuts
Comptech front upper strut bar
<U>Engine:</U>
JUN satge III shafts on AEM gears
PR3 complete head slighty touched by piston
JUN vavle springs /w Corwer TI retainers
Skunk2 B16/b18c5 intake manifold
ITR +2mm bored by maxbore.com TB
ES motor mount insert / placeracing driver's side motor mount
OBD2 engine harness + dizzy
CTR N1 Crank Pulley
AEM CAI
AEM fuel rail /w B&M FPR and gauge
JDM 4-1 ITR header
2.5 inlet/outlet testpipe /w 2.5 side-dump
DC Sports SS Exhaust
B18c1 with a hole in 3rd cylinder, will include original B16a2 bottom end taken out with 65,000miles for slightly extra.
Greddy oil catch can
B16a2 hydro tranny
ACT Xtreme clutch kit less than 6 months of use
JUN UL flywheel
Wlabro 255Hi pump
no AC no PS
<U>ECU:</U>
p28 flashed for JUN stage III cams. (This is the real deal, not a chip, complete reflash by JUN of Japan)
OBD2->1 harness
Apexi VAFC-1
Apexi RSM
<U>Chasis pics:</U>
EVERYTHING IS LOCATED IN MARIETTA, GA!
I will be going down there November 20th to visit my family for Thanksgiving week (I live in Chicago)
I can ship parts out then or if you're local I can meet up.
Find vouches in sig.
AIM: SpoonSport12
Since I never sold a rolling chasis before, no price is qouted yet.
Vin will be given to mod upon request on both chasis and motor(s) - It will just take some time since I'm in Chicago.
Thanks.
Modified by Louie_EM1 at 2:32 AM 10/31/2004
Modified by Louie_EM1 at 2:52 AM 10/31/2004
Modified by Louie_EM1 at 4:50 AM 10/31/2004
Guest
Posts: n/a
Re: (NO PRESSURE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NO PRESSURE »</TD></TR><TR><TD CLASS="quote">Bump for clean SI !!!!</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bunnyrabbit »</TD></TR><TR><TD CLASS="quote">BUMP- NICE RIDE-- HOW MUCH???</TD></TR></TABLE>
Thanks you two!
Price? - I have no clue, entertain me with trades and cash!
Since this is a complete rolling chasis I donno how much to ask, if it were just a shell it would be easier to set a price.
VIN for both chasis and motors I have is available upon request!
(I have the original B16a2 /w 65k miles on it)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bunnyrabbit »</TD></TR><TR><TD CLASS="quote">BUMP- NICE RIDE-- HOW MUCH???</TD></TR></TABLE>
Thanks you two!
Price? - I have no clue, entertain me with trades and cash!
Since this is a complete rolling chasis I donno how much to ask, if it were just a shell it would be easier to set a price.
VIN for both chasis and motors I have is available upon request!
(I have the original B16a2 /w 65k miles on it)
senior gold member
Joined: Apr 2002
Posts: 4,090
Likes: 0
From: dont fake, the funk, earf
Re: (Louie_EM1)
I would say just take the price of what the car is worth and just decrease the price of a b16 swap. Take into account the aftermarket pieces. wanna trade those heliums for some si wheels?
wanna trade those heliums for some si wheels?
Guest
Posts: n/a
Re: (Ivan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ivan »</TD></TR><TR><TD CLASS="quote">I would say just take the price of what the car is worth and just decrease the price of a b16 swap. Take into account the aftermarket pieces. wanna trade those heliums for some si wheels?</TD></TR></TABLE>
Yuu know those heliums were once yours??
Yeah I donno about shipping on em, they could be a bitch. Plus I like em. I know One6 sells a rim for like $115.
wanna trade those heliums for some si wheels?</TD></TR></TABLE>Yuu know those heliums were once yours??
Yeah I donno about shipping on em, they could be a bitch. Plus I like em. I know One6 sells a rim for like $115.
Trending Topics
Honda-Tech Member
Joined: Sep 2003
Posts: 295
Likes: 0
Re: (Louie_EM1)
Send me an email at boosted2000si@aol.com Let me know what your asking for just the rolling chassis. Ill talk more details in email....
Thread
Thread Starter
Forum
Replies
Last Post
