where the lower control arm hooks to the tire well is bent







the B18b1 With a freash coat of paint..


















Modified by TweakedCrx at 1:44 PM 2/28/2005

 

LOADS of work, have fun with it! What are your plans???

 

nice find but i would be concerned abt that rear wheel bec if the frame is bent then ehhh

 

Neighbors love front yard swaps!! Good luck, but its missing something, BOOST!!!

 

good luck on that dude. i have one too but mines isnt nearly looking that bad ./.. but my coupe and a del sol we are still in the process with are getting alot better. total restoration its great.. what are u building it for. what are u going to do with it. dont want to get ur thread locked.

 

The car is a 92 cx
1: fix the body
2:drop a d16z6
3: Boost

 

is the suspension just tweaked or did is suffer damage to the under carage?

 

Modified by TweakedCrx at 6:39 PM 1/13/2005

 

lol bent frame

 

Swap motor work is simple compared to that bent rear end. Good luck! Sounds fun...if you have money.

 

if u came to albuquerque i could have it fixed for u in one day for about 300 bucks.. they did a nice job on my coupe and they are cool as hell with me.

 

Best of luck dude.

That's going on a frame machine.

 

Holy molly.....

Damn I had the same thing on my car cost me a pretty buck (it was a little bit worse though) Expect to pay like $400-500 to get that fixed nicely unless you bent the control arms too.

and word of advice pull the axles before you pull the motor out because this way you might break them. It's alot easier that way, and you will need to pull them anyways to put the tranny back in there.

Good luck.

 

i am in a autobody class and this is my school project.

 

big project...good luck

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by igyloo &raquo;</TD></TR><TR><TD CLASS="quote">big project...good luck</TD></TR></TABLE>

 

That looks more like a job for Bob Vila than anything else. That bitch needs a complete overhaul.

 

thats a hell of a project...

 

the car was give to me so if i have to put 1k in the body just to get it stiagti am cool with that..

 

good luck man... when it is all done you are gonna love it exp. cause you will be turning it into something fast from something not even driveable! props if ya can get it done!

 

**** for free i would have tooken it to...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tweakedcrx &raquo;</TD></TR><TR><TD CLASS="quote">i am in a autobody class and this is my school project.
</TD></TR></TABLE>

Ah the good olds days. i remember it like it was yesterday....

 

Can we use this to represent Honda-tech.com?? This is a prefect example. Of how people love their Hondas so much. SO much work, and in the end, its all worth it. Good luck man! Best of luck with that project car, it will be pimp im sure in the end (thats a figure of speech, no chrome 18's please)

 

sux...bent frames arent fun...i bent my 95 gti vr6 front right with a log...unibody sux.

 

did u guys pull the motor out with the axles still in the trans?