camber kit choices
Thread Starter
Joined: Nov 2003
Posts: 2,783
Likes: 1
From: Linden, NJ, USA
camber kit choices
what choices do i have for my 4th gen for the front? i need one asap! since igot screwed by some @sshole on ebay.... 
and just installed my skunk 2 coilovers yesterday 
and just installed my skunk 2 coilovers yesterday
Honda-Tech Member
Joined: Jan 2004
Posts: 10,629
Likes: 1
From: Further down the spiral, TX, usa
Re: camber kit choices (hOndafienD 04)
The ones I'd get for mine are from SPC. Everyone seems to be happy with them...
http://www.spcperformance.com/
http://www.spcperformance.com/
Honda-Tech Member
Joined: Jan 2004
Posts: 10,629
Likes: 1
From: Further down the spiral, TX, usa
Re: (hOndafienD 04)
Just look on their links page for the dealers.
I have bought stuff from this place in the past and they were pretty good. Looks like you'll spend around $75 a corner.
http://www.ptuning.com/html/se...word=
I have bought stuff from this place in the past and they were pretty good. Looks like you'll spend around $75 a corner.
http://www.ptuning.com/html/se...word=
Re: camber kit choices (hOndafienD 04)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hOndafienD 04 »</TD></TR><TR><TD CLASS="quote">since igot screwed by some @sshole on ebay.... </TD></TR></TABLE>
I am SOOO sick of thieves. They all should be shot.
Anyway, talk to Shakes on this site. He is selling a set.
</TD></TR></TABLE>I am SOOO sick of thieves. They all should be shot.
Anyway, talk to Shakes on this site. He is selling a set.
Trending Topics
Honda-Tech Member
Joined: Sep 2002
Posts: 2,944
Likes: 0
From: ATL, GA, USA
you can run ingalls anchor bolts front and rear at like 100 bucks a set...
personally i'd run as much camber as you can get in the front and just get kits for the rears so you can rotate and save tires. My 5th gen is slammed and I could only get -1.6 and -1.9, i was shooting for -2 to -2.5 degrees. I have kits for the rear but haven't installed them
personally i'd run as much camber as you can get in the front and just get kits for the rears so you can rotate and save tires. My 5th gen is slammed and I could only get -1.6 and -1.9, i was shooting for -2 to -2.5 degrees. I have kits for the rear but haven't installed them
Thread Starter
Joined: Nov 2003
Posts: 2,783
Likes: 1
From: Linden, NJ, USA
why would you want camber? it kills your tires...so what if it may handle a little better with negative camber...too much isnt good for handeling either, and i dont have money to spend on tires every 6 months, and then thieves make it worse for me! what did i do to deserve this? man hate thieves!
Honda-Tech Member
Joined: Sep 2002
Posts: 2,944
Likes: 0
From: ATL, GA, USA
well some people like a car with lots of corner grip...
like i said, rotate to the rear with the camber kits to save tires. i'm running stock size tires so same contact patch, with MINIMAL camber wear...camber wear is only significantly noticeable when you up size the tires.
like i said, rotate to the rear with the camber kits to save tires. i'm running stock size tires so same contact patch, with MINIMAL camber wear...camber wear is only significantly noticeable when you up size the tires.
Thread Starter
Joined: Nov 2003
Posts: 2,783
Likes: 1
From: Linden, NJ, USA
yeah well my car already handled extremely well with the neuspeeds, and i dont want to push it with the skunk 2's yet cuz my tires are completely bald....but hey....everyome has to do whatever they like...thanx tho...and opinion is an opinion....no harm done
Thread
Thread Starter
Forum
Replies
Last Post
Contender25
Honda CRX / EF Civic (1988 - 1991)
2
Aug 5, 2006 11:18 AM
primoEF
Honda CRX / EF Civic (1988 - 1991)
5
May 13, 2003 07:21 PM
sparknblaze
Honda Accord (1990 - 2002)
5
Dec 18, 2002 06:16 AM