Well, its time to say good bye to my blown motors

I have 7 blown z6's ranging from busted ring lands, to rod bolt failure, to burns 1 1/4 of oil of day because the rings are gone, to it squeals to damn loud to drive and i dont know dont care about the motor anymore...

The motors range from 92-95, i have ANY part imaginable. So if you need a whole OBD1 mini-me change over or OBD0 changeover i have you covered.

The Mini-me's will come with the following:

Complete head, valve cover, obd1 or obd0 distro, obd1/obd0 injectors (fuel resistor box included with obd0) complete manifold with TB, used spark plugs and wires , and headbolts.
Basically all you would need is a new headgasket to complete the motor .

I will also part out, if u just need a bare head, or solenoid or distro or rods or etc....

Trades welcomed, i am open to all sorts of trades, just let me know....

SoCal preffered, but will ship at buyers expense. Countless vouches here on HT also if needed..
Pm me with what you need or post on this thread.
AIM/email Mytho808@aol.com

Here is 4 of the 7, you get the picture



Modified by Nerologic at 3:59 AM 1/2/2005

 

damn i didn't think anybody had more then me...lol...

hey, how much for a good vtec solenoid?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LoStMyBoOsT &raquo;</TD></TR><TR><TD CLASS="quote">damn i didn't think anybody had more then me...lol...

hey, how much for a good vtec solenoid?</TD></TR></TABLE>

haha yeah i do have alot...

shott me a trade man, i know u have tons of stuff.....

 

CHECK PM ASAP

 

You have email bump

 

all Pm's and email's responded....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nerologic &raquo;</TD></TR><TR><TD CLASS="quote">all Pm's and email's responded....</TD></TR></TABLE>

 

holy **** lol
bump for a cool guy

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bucbaby &raquo;</TD></TR><TR><TD CLASS="quote">holy **** lol
bump for a cool guy</TD></TR></TABLE>

haha thanks man...

 

Sending a PM about solenoid...

 

how the hell did you manage to blow 7 motors

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ILLICON3000 &raquo;</TD></TR><TR><TD CLASS="quote">how the hell did you manage to blow 7 motors</TD></TR></TABLE>

persistance lol

 

got any non knocking non f'd up cranks?

 

how much for a VTEC pressure switch?

 

just wanna bid on a dizzy and the spark plug wires. pm you in a day or 2 when i have the dough. take it easy

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by klungemonger &raquo;</TD></TR><TR><TD CLASS="quote">Sending a PM about solenoid...</TD></TR></TABLE>

Pm'ed back

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ILLICON3000 &raquo;</TD></TR><TR><TD CLASS="quote">how the hell did you manage to blow 7 motors</TD></TR></TABLE>
Boost kills

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedcivichatchbacksi &raquo;</TD></TR><TR><TD CLASS="quote">got any non knocking non f'd up cranks?</TD></TR></TABLE>

yup 30 bucks and its yours (you pull it though )

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DJ_SaNdOz &raquo;</TD></TR><TR><TD CLASS="quote">how much for a VTEC pressure switch?</TD></TR></TABLE>
35 shipped 25 picked up

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ticaL &raquo;</TD></TR><TR><TD CLASS="quote">just wanna bid on a dizzy and the spark plug wires. pm you in a day or 2 when i have the dough. take it easy</TD></TR></TABLE>
alright man just let me know....

 

how much for a complete head? or everything i need for a mini me?

 

price for a excellent vtec solenoid and also a vtec z6 valve cover? to iowa 50125 ...thx

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92integra_gs &raquo;</TD></TR><TR><TD CLASS="quote">price for a excellent vtec solenoid and also a vtec z6 valve cover? to iowa 50125 ...thx</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ProjektHB &raquo;</TD></TR><TR><TD CLASS="quote">how much for a complete head? or everything i need for a mini me?</TD></TR></TABLE>

Pm'ed

 

Pmed about a mini me swap!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LankorDie &raquo;</TD></TR><TR><TD CLASS="quote">Pmed about a mini me swap! </TD></TR></TABLE>

Responded....

Guy's please be specific when you are asking for a "head" (so i can tell you how much instantly)
like do you need a distro? vtec solenoid? Intake manfiold etc.....

 

you have any p30s or p28s?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gulftiresinc &raquo;</TD></TR><TR><TD CLASS="quote">you have any p30s or p28s?</TD></TR></TABLE>

nope, but i can get some

 

how much?

 

How much for a good obd1 dizzy?