B18 manual cable tranny axles into '91 CRX SI
Thread Starter
Junior Member
Joined: Mar 2001
Posts: 923
Likes: 0
From: Houston, TX, USA
Question...B18 manual cable tranny axles into '91 CRX SI
I searched.... did not find.
I did a b18 swap for a friend. (This is NSXLR8 not Stoopid by the way)
Everything's done... Except the axles. I'm using the ones off a 92 GSR (Mid shaft is in) Problem is, the circumference of the part that butts up to the hub is too large. It locks up the wheel!
What's the fix? Anyone? GSR hubs - Do they screw up alignment? help!
Modified by st00pid at 8:11 PM 10/2/2004
I did a b18 swap for a friend. (This is NSXLR8 not Stoopid by the way)
Everything's done... Except the axles. I'm using the ones off a 92 GSR (Mid shaft is in) Problem is, the circumference of the part that butts up to the hub is too large. It locks up the wheel!
What's the fix? Anyone? GSR hubs - Do they screw up alignment? help!
Modified by st00pid at 8:11 PM 10/2/2004
Thread
Thread Starter
Forum
Replies
Last Post
BoRiCuA
Honda CRX / EF Civic (1988 - 1991)
13
Jun 20, 2008 06:19 AM
GSRCRXsi
Honda CRX / EF Civic (1988 - 1991)
2
Dec 10, 2004 08:13 PM
