FS: AP Racing big brake kit for civic and integra
Thread Starter
Honda-Tech Member
Joined: Jan 2002
Posts: 5,178
Likes: 1
From: Raleigh, NC
Re: FS: AP Racing big brake kit for civic and integra (JeffS)
No, they have not been rebuilt, and do not need to be.
The rotors are AP (what else would they be?). Any replacement parts, seals, rotors, hats, whatever, can be purchased from AP.
The rotors are AP (what else would they be?). Any replacement parts, seals, rotors, hats, whatever, can be purchased from AP.
Thread Starter
Honda-Tech Member
Joined: Jan 2002
Posts: 5,178
Likes: 1
From: Raleigh, NC
Re: FS: AP Racing big brake kit for civic and integra (MSchu)
There's a picture in the first post. There's also a link to the "exploded kit view". Either of which should answer your first question.
I don't know the answer to the second. I'm guessing aluminum. I'll have to look when I get home.
I don't know the answer to the second. I'm guessing aluminum. I'll have to look when I get home.
niice
Guest
Posts: n/a
Re: FS: AP Racing big brake kit for civic and integra (ILL WILL)
So they are set up for the 90-00 integra arm not specific hanger is needed to mount?
My mistake, I forgot to click on the links... hanger question still need answered if you know
thanks
Schu
My mistake, I forgot to click on the links... hanger question still need answered if you know
thanks
Schu
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jan 2002
Posts: 5,178
Likes: 1
From: Raleigh, NC
Re: FS: AP Racing big brake kit for civic and integra (MSchu)
The caliper is a direct bolt-on for the civic/integra. Everything you need to install it is included. I'll probably take a new picture showing the lines included tonight.
I believe what they do is make a caliper "family" with a long blank mounting flange - then machine the flange for each individual application.
If they don't sell soon I'll probably put them on my daily driver - just for the hell of it.
I believe what they do is make a caliper "family" with a long blank mounting flange - then machine the flange for each individual application.
If they don't sell soon I'll probably put them on my daily driver - just for the hell of it.
Thread Starter
Honda-Tech Member
Joined: Jan 2002
Posts: 5,178
Likes: 1
From: Raleigh, NC
Re: FS: AP Racing big brake kit for civic and integra (JeffS)
Potential buyers should pay attention to the wheel fitment diagram. They will fit under *some* 15x7 wheels, but not just any 15x7 wheel.
vtecvoodoo had them under some 5zigen FN01R wheels with no problems. He also ran with some Volk TE37's (I forget the offset) but I think he might have run a spacer with those.
I was expecting them to fit under my SSR Comps since they have a lot of caliper clearance, but I never got around to trying it.
vtecvoodoo had them under some 5zigen FN01R wheels with no problems. He also ran with some Volk TE37's (I forget the offset) but I think he might have run a spacer with those.
I was expecting them to fit under my SSR Comps since they have a lot of caliper clearance, but I never got around to trying it.
Guest
Posts: n/a
Re: FS: AP Racing big brake kit for civic and integra (JeffS)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JeffS »</TD></TR><TR><TD CLASS="quote">The caliper is a direct bolt-on for the civic/integra. Everything you need to install it is included. I'll probably take a new picture showing the lines included tonight.
I believe what they do is make a caliper "family" with a long blank mounting flange - then machine the flange for each individual application.
If they don't sell soon I'll probably put them on my daily driver - just for the hell of it.
</TD></TR></TABLE>
this is absolutely true, that is why I asked if it had hangers... And my four pistons require 16" and spacers... but my rotors are over 12"... smaller rotors and 15" rims make this very interesting, well that and ther fact that they are AP lockheeds. Do you know off hand if the lines are -3 or -4?
I believe what they do is make a caliper "family" with a long blank mounting flange - then machine the flange for each individual application.
If they don't sell soon I'll probably put them on my daily driver - just for the hell of it.
</TD></TR></TABLE>
this is absolutely true, that is why I asked if it had hangers... And my four pistons require 16" and spacers... but my rotors are over 12"... smaller rotors and 15" rims make this very interesting, well that and ther fact that they are AP lockheeds. Do you know off hand if the lines are -3 or -4?
Thread Starter
Honda-Tech Member
Joined: Jan 2002
Posts: 5,178
Likes: 1
From: Raleigh, NC
Re: FS: AP Racing big brake kit for civic and integra (MSchu)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MSchu »</TD></TR><TR><TD CLASS="quote">
Do you know off hand if the lines are -3 or -4?</TD></TR></TABLE>
No. I could measure them if that would tell you anything though.
Do you know off hand if the lines are -3 or -4?</TD></TR></TABLE>
No. I could measure them if that would tell you anything though.
Honda-Tech Member
Joined: Jan 2000
Posts: 1,512
Likes: 2
From: Vancouver, BC, Canada
Re: FS: AP Racing big brake kit for civic and integra (ILL WILL)
Hey Jeff,
Any interest in trading the brake kit for some Mugen MF8 wheels and tires?
Have a look here http://members.shaw.ca/m_sasso/forsale.htm
Any interest in trading the brake kit for some Mugen MF8 wheels and tires?
Have a look here http://members.shaw.ca/m_sasso/forsale.htm
for me buying other crap instead of these monsters