ok well, someone chopped up my wiring for the DC2 conversion, was an accident cant get mad....but is there an easy way to replace out the main wires for the headlights from the engine relay box or something? please let me know. i heard that the entire wiring harness would need replaceing, although this sounds premature in technology, i figured what happenes if wiriing needs replacement, there must be an easier way.....looking for info if wiring comes off in specific sections of wire.....please LMK if anyone is aware or experienced this issue before...

 

Bump

 

what harness do you speak of? you can splice it in for the most part, im not 100% sure on everything, but im sure you can splice it in for lights

 

what i really want is to have the OEM wires replaced for the headlights. I dont want it to look spliced because then it looks crappy, i want to replaced it with an OEM set if plugs and wires, i dont know if this is possible through replaceing a SECTION of wire that might have an A to Z section maybe from the main relay to the headlights, OR if i have to replace the entire wiring harness INCLUDING UNDERNEATH THE DASH....any help would be great thanks...

 

You can splice it back, and if done correctly you wont be able to tell.

 

im horrible at wiring, maybe ill jus take it too a shop...