Just wondering if anybody out there is willing to share their cad drawings with me. I have a 6week course on autocad and blueprinting and finished everything with 4weeks left to go. Just want to try making a turbo manifold using autocad and I don't have flanges sitting around to measure. I'm using autocad 2008

 

this should help some

http://www.t3flange.com/

 

thanks

 

how do you go about cutting pipes to make a collector? Like angles and lengths. also do you mill or sand bottom of collector flat and then weld it onto flange or just weld it onto flange and enlarge outlet
Need to know this when I have to draw it

 

Flange specs - Turbine Inlet Flanges - 304 Stainless - CNC machined
http://www.burnsstainless.com/....html

In this website you have the cad drawings of T3 , T4 and T6
http://www.forcedinductions.com/help.htm

T4 cad drawing in detail
http://www.turbobygarrett.com/...2.pdf

Here are a few threads you can have a look at , a pre set time ( not sure on the time frame ) the threads are put in a archive it is just a matter of searching in the archives

How I cut a 3 to 1 merge collector. [Archived]
https://honda-tech.com/zerothread/1761667

CRX/EF specific B series top mount turbo manifolds
https://honda-tech.com/zerothread?id=1566745

Turbo merge collectors for you fabricators. Cut for T3 flanges [Archived]
https://honda-tech.com/zero...51991

Honda-Tech.com > Welding/Fabrication > DIY: Constructing Sorta Equal Length Tubular Replica Manifold
https://honda-tech.com/zero...56666

How about this mani? *Sketch* [Archived] - some cad drawings in this thread
https://honda-tech.com/zerothread?id=1506321
https://honda-tech.com/zero...68809

BmCRace.com Manifolds, Flanges, Collectors [Archived]
https://honda-tech.com/zerothread?id=1124540

Precision computer aided exhaust header design
http://www.spectrum5.com/s5headerRevA.pdf

There is heaps more information just use a search engine

have fun

cheers

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FPV_GTp &raquo;</TD></TR><TR><TD CLASS="quote">Flange specs - Turbine Inlet Flanges - 304 Stainless - CNC machined
http://www.burnsstainless.com/....html

In this website you have the cad drawings of T3 , T4 and T6
http://www.forcedinductions.com/help.htm

T4 cad drawing in detail
http://www.turbobygarrett.com/...2.pdf

Here are a few threads you can have a look at , a pre set time ( not sure on the time frame ) the threads are put in a archive it is just a matter of searching in the archives

How I cut a 3 to 1 merge collector. [Archived]
https://honda-tech.com/zerothread/1761667

CRX/EF specific B series top mount turbo manifolds
https://honda-tech.com/zerothread?id=1566745

Turbo merge collectors for you fabricators. Cut for T3 flanges [Archived]
https://honda-tech.com/zero...51991

Honda-Tech.com &gt; Welding/Fabrication &gt; DIY: Constructing Sorta Equal Length Tubular Replica Manifold
https://honda-tech.com/zero...56666

How about this mani? *Sketch* [Archived] - some cad drawings in this thread
https://honda-tech.com/zerothread?id=1506321
https://honda-tech.com/zero...68809

BmCRace.com Manifolds, Flanges, Collectors [Archived]
https://honda-tech.com/zerothread?id=1124540

Precision computer aided exhaust header design
http://www.spectrum5.com/s5headerRevA.pdf

There is heaps more information just use a search engine

have fun

cheers

</TD></TR></TABLE>

nice post mang...esp for an 07!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FPV_GTp &raquo;</TD></TR><TR><TD CLASS="quote">Flange specs - Turbine Inlet Flanges - 304 Stainless - CNC machined
http://www.burnsstainless.com/....html

In this website you have the cad drawings of T3 , T4 and T6
http://www.forcedinductions.com/help.htm

T4 cad drawing in detail
http://www.turbobygarrett.com/...2.pdf

Here are a few threads you can have a look at , a pre set time ( not sure on the time frame ) the threads are put in a archive it is just a matter of searching in the archives

How I cut a 3 to 1 merge collector. [Archived]
https://honda-tech.com/zerothread/1761667

CRX/EF specific B series top mount turbo manifolds
https://honda-tech.com/zerothread?id=1566745

Turbo merge collectors for you fabricators. Cut for T3 flanges [Archived]
https://honda-tech.com/zero...51991

Honda-Tech.com &gt; Welding/Fabrication &gt; DIY: Constructing Sorta Equal Length Tubular Replica Manifold
https://honda-tech.com/zero...56666

How about this mani? *Sketch* [Archived] - some cad drawings in this thread
https://honda-tech.com/zerothread?id=1506321
https://honda-tech.com/zero...68809

BmCRace.com Manifolds, Flanges, Collectors [Archived]
https://honda-tech.com/zerothread?id=1124540

Precision computer aided exhaust header design
http://www.spectrum5.com/s5headerRevA.pdf

There is heaps more information just use a search engine

have fun

cheers</TD></TR></TABLE>

looks like i need to read up

 

Flange specs - Turbine Inlet Flanges - 304 Stainless - CNC machined
http://www.burnsstainless.com/....html

In this website you have the cad drawings of T3 , T4 and T6
http://www.forcedinductions.com/help.htm

T4 cad drawing in detail
http://www.turbobygarrett.com/...2.pdf

Here are a few threads you can have a look at , a pre set time ( not sure on the time frame ) the threads are put in a archive it is just a matter of searching in the archives

How I cut a 3 to 1 merge collector. [Archived]
https://honda-tech.com/zerothread/1761667

CRX/EF specific B series top mount turbo manifolds
https://honda-tech.com/zerothread?id=1566745

Turbo merge collectors for you fabricators. Cut for T3 flanges [Archived]
https://honda-tech.com/zero...51991

Honda-Tech.com &gt; Welding/Fabrication &gt; DIY: Constructing Sorta Equal Length Tubular Replica Manifold
https://honda-tech.com/zero...56666

How about this mani? *Sketch* [Archived] - some cad drawings in this thread
https://honda-tech.com/zerothread?id=1506321
https://honda-tech.com/zero...68809

BmCRace.com Manifolds, Flanges, Collectors [Archived]
https://honda-tech.com/zerothread?id=1124540

Precision computer aided exhaust header design
http://www.spectrum5.com/s5headerRevA.pdf

There is heaps more information just use a search engine

have fun

cheers

 

why'd you double post that same thing

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KENetics1 &raquo;</TD></TR><TR><TD CLASS="quote">why'd you double post that same thing</TD></TR></TABLE>

lol why does it matter? it helps he can repost it all he wants.................

calm down there buddy

 

Flange specs - Turbine Inlet Flanges - 304 Stainless - CNC machined
http://www.burnsstainless.com/....html

In this website you have the cad drawings of T3 , T4 and T6
http://www.forcedinductions.com/help.htm

T4 cad drawing in detail
http://www.turbobygarrett.com/...2.pdf

Here are a few threads you can have a look at , a pre set time ( not sure on the time frame ) the threads are put in a archive it is just a matter of searching in the archives

How I cut a 3 to 1 merge collector. [Archived]
https://honda-tech.com/zerothread/1761667

CRX/EF specific B series top mount turbo manifolds
https://honda-tech.com/zerothread?id=1566745

Turbo merge collectors for you fabricators. Cut for T3 flanges [Archived]
https://honda-tech.com/zero...51991

Honda-Tech.com &gt; Welding/Fabrication &gt; DIY: Constructing Sorta Equal Length Tubular Replica Manifold
https://honda-tech.com/zero...56666

How about this mani? *Sketch* [Archived] - some cad drawings in this thread
https://honda-tech.com/zerothread?id=1506321
https://honda-tech.com/zero...68809

BmCRace.com Manifolds, Flanges, Collectors [Archived]
https://honda-tech.com/zerothread?id=1124540

Precision computer aided exhaust header design
http://www.spectrum5.com/s5headerRevA.pdf

There is heaps more information just use a search engine

have fun

cheers

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KENetics1 &raquo;</TD></TR><TR><TD CLASS="quote">Flange specs - Turbine Inlet Flanges - 304 Stainless - CNC machined
http://www.burnsstainless.com/....html

In this website you have the cad drawings of T3 , T4 and T6
http://www.forcedinductions.com/help.htm

T4 cad drawing in detail
http://www.turbobygarrett.com/...2.pdf

Here are a few threads you can have a look at , a pre set time ( not sure on the time frame ) the threads are put in a archive it is just a matter of searching in the archives

How I cut a 3 to 1 merge collector. [Archived]
https://honda-tech.com/zerothread/1761667

CRX/EF specific B series top mount turbo manifolds
https://honda-tech.com/zerothread?id=1566745

Turbo merge collectors for you fabricators. Cut for T3 flanges [Archived]
https://honda-tech.com/zero...51991

Honda-Tech.com &gt; Welding/Fabrication &gt; DIY: Constructing Sorta Equal Length Tubular Replica Manifold
https://honda-tech.com/zero...56666

How about this mani? *Sketch* [Archived] - some cad drawings in this thread
https://honda-tech.com/zerothread?id=1506321
https://honda-tech.com/zero...68809

BmCRace.com Manifolds, Flanges, Collectors [Archived]
https://honda-tech.com/zerothread?id=1124540

Precision computer aided exhaust header design
http://www.spectrum5.com/s5headerRevA.pdf

There is heaps more information just use a search engine

have fun

cheers</TD></TR></TABLE>

LOL smartass

 

I'm glad you have a sense of humor. Some people would've taken it the wrong way.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KENetics1 &raquo;</TD></TR><TR><TD CLASS="quote">I'm glad you have a sense of humor. Some people would've taken it the wrong way.</TD></TR></TABLE>



in a good mood............................ patriots = lose

 

OOPPS sorry KENetics1

How do you reply to just the thread , not a persons post?

I mean not having to click on someone elses reply or for that matter my own ???

any help would be appreciated , thanks

I'm new to this forum having slight trouble navigating it

cheers


PS: my PC locks ups and does what it wants sometimes