Hey I just want to thank Jason from cncport.com for the great job done to my type r head and how fast and awesome customer service and fast turn around....

I sent Jason my supertech valvetrain and rev valves.....

he made this...


A little branding




Chambers


close up!




I am really happy and this isnt the last time you hear from me buddy....

 

pretty much impossible to tell anything from the pics . but you valves are shiny

 

what do you mean impossible!!! you can see the whole valve, what more do you expect from a picture....

 

well, for one, most cameras have this thing called focus. the only thing i can make out is the deshrouding. maybe my monitor is worse than i thought.

 

looks ok how much did the work cost you?

 

Call Jason for pricing! He gave me a great deal I have used this same head on a few turbo cars and some N/A and the head does the job! Now I just had to have one of my own!

 

more pics!!!

 

WOW, how much did it cost you if you dont mind me asking..

 

looks good besides the web. looks like that might still have been done by hand, or maybe an optical illusion because the picture isnt straight on.

 

wow your never happy! Come to my house and tak a better look! Ahhhh I see you do port work also....

 

you cant show port work and expect it not to get criticized IMO. and i dont claim to be any expert, ive just got an eye for symmetry. dont get me wrong, its definitely a good looking job, hence all the

did they flowbench it for you, or did they give a general idea of the flow since it is a CNC program?

 

flowed intake 285 exhaust 230 @ .450 lift

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cigrafix2 &raquo;</TD></TR><TR><TD CLASS="quote">flowed intake 285 exhaust 230 @ .450 lift</TD></TR></TABLE>
Nice-particularly the exhaust flow

 

nice numbers!!

 

now send it off to brad at RLZ for a quick VJ and watch the #s pick up. not bad flow #s about average.

 

Nah I am really happy with the way it turned out! Thanks anyways Brad is no joke when it comes to doing what he does but I am all set with the turnout of this....

 

any updates on this? dyno charts, flow charts?

 

Please post flow charts. While the pics offer some insight into the quality and craftmanship of the job, they don't quantify if the head will really flow..

 

Hey what bit do u use to mill the head flat like turbo end mill cuz i wanna do one but not sure what bit to use.

 

What was the turnaround time?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GetawayInMoscow &raquo;</TD></TR><TR><TD CLASS="quote">What was the turnaround time?</TD></TR></TABLE>

I was just talkin to him today and he is doing a group buy right now. He plans to have the machine setup for them on the 3rd of december and depending what position you get in line it could be a couple days to a couple weeks. There are 4 on the list now. He wants a minimum of 5 to go through with it. By the way he is doing b16 and p72 heads for this group buy. I really wish I was ready for this already!

 

wouldn't mind a p13 head getting done. i hav a spare one i started porting but i lost my working and storage space for now.

how much is he charging for the b series heads?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Honda_Fanatic &raquo;</TD></TR><TR><TD CLASS="quote">

I was just talkin to him today and he is doing a group buy right now. He plans to have the machine setup for them on the 3rd of december and depending what position you get in line it could be a couple days to a couple weeks. There are 4 on the list now. He wants a minimum of 5 to go through with it. By the way he is doing b16 and p72 heads for this group buy. I really wish I was ready for this already!</TD></TR></TABLE>

Did he create a new post for this group buy?

 

something about those ports i just don't like.
and definitely don't like the chamber.

 

http://www.b20vtec.com/forums/....html