How to install aftermarket HID kit in one picture.
#3
Honda-Tech Member
Thread Starter
iTrader: (7)
Join Date: Dec 2005
Location: Anchorage, AK
Posts: 3,032
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install aftermarket HID kit in one picture. (alltech_hybrid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by alltech_hybrid »</TD></TR><TR><TD CLASS="quote">ummm nice but what does it have to do with paint and body? </TD></TR></TABLE>
Find a better section to put it in, honda-tech doesn't have an electronics section, and this section has plenty of topics about lighting..
Find a better section to put it in, honda-tech doesn't have an electronics section, and this section has plenty of topics about lighting..
#5
Member
Join Date: May 2006
Location: San francisco, Ca
Posts: 1,200
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install aftermarket HID kit in one picture. (DB1_559)
to tell you the truth, its not even that hard to put in hids. its just as easy swapping light bulbs
#6
Honda-Tech Member
Thread Starter
iTrader: (7)
Join Date: Dec 2005
Location: Anchorage, AK
Posts: 3,032
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install aftermarket HID kit in one picture. (98GSRDC2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98GSRDC2 »</TD></TR><TR><TD CLASS="quote">to tell you the truth, its not even that hard to put in hids. its just as easy swapping light bulbs</TD></TR></TABLE>
Yes, and if you dont wire it in as above with the relay you can easily melt your stock wiring harness'
Yes, and if you dont wire it in as above with the relay you can easily melt your stock wiring harness'
#7
Re: How to install aftermarket HID kit in one picture. (OMG THE GOGGLES)
okay i understand everything except where u plug it in to ur stock harness the plug i have is just like the one pictured but my light harness is a three prong and that one is two.
do i connect it directly to the bulb harness or somewhere else
do i connect it directly to the bulb harness or somewhere else
Trending Topics
#10
Honda-Tech Member
Thread Starter
iTrader: (7)
Join Date: Dec 2005
Location: Anchorage, AK
Posts: 3,032
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install aftermarket HID kit in one picture. (hatch96y7)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hatch96y7 »</TD></TR><TR><TD CLASS="quote">that last connection on the bottom right of the pic</TD></TR></TABLE>
Dependent upon the kit you get, you should have a different harness plug. Say for an example, a 92-95 civic with an H4, its a 3 prong plug so you should have an h4 connector to wire it into. If you do not, then you would simply cut the 2 prong off of the end of the hid kit, match a positive and negative feed, and connect. Should pretty much be plug and play though. Post pics and I will try and help you asap. Just pm me.
Dependent upon the kit you get, you should have a different harness plug. Say for an example, a 92-95 civic with an H4, its a 3 prong plug so you should have an h4 connector to wire it into. If you do not, then you would simply cut the 2 prong off of the end of the hid kit, match a positive and negative feed, and connect. Should pretty much be plug and play though. Post pics and I will try and help you asap. Just pm me.
#12
Honda-Tech Member
Join Date: Jul 2005
Location: nashville/fresno, tn/ca, Cambodia
Posts: 3,089
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install aftermarket HID kit in one picture. (OMG THE GOGGLES)
aye do you have to cut a new hole for the hid cause mine do???
#17
* B A N N E D *
Join Date: Jul 2007
Location: Selling HIDs to you, Everywhere, USA
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to install aftermarket HID kit in one picture. (boostedeghatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OMG THE GOGGLES »</TD></TR><TR><TD CLASS="quote">
Yes, and if you dont wire it in as above with the relay you can easily melt your stock wiring harness'</TD></TR></TABLE>
I never knew that. Ive had mine in for about a year and the harness is fine
Yes, and if you dont wire it in as above with the relay you can easily melt your stock wiring harness'</TD></TR></TABLE>
I never knew that. Ive had mine in for about a year and the harness is fine
#24
Honda-Tech Member
Thread Starter
iTrader: (7)
Join Date: Dec 2005
Location: Anchorage, AK
Posts: 3,032
Likes: 0
Received 0 Likes
on
0 Posts
Re: FV-QR (White Smoke)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by White Smoke »</TD></TR><TR><TD CLASS="quote">This deserves a bump!</TD></TR></TABLE>
Tanks!
Tanks!