iam geting code 20 electric load detector does anybody know how to fix this problem not sure where to even start with this one thanks in advance guys

 

im trying to find the same thing you are cus i got that code. did your ecu blink once then pause then blink twenty times?

 

IIRC, the ELD is housed in the underhood fuse box on the passenger side strut tower. I believe the only fix is to replace the entire unit (fusebox).

 

try replacing and cleaning your engine bay grounds. worked for me.

 

yes i replaced the whole fuse box works great now thankx guys

 

thats the only fix? where did you get the fuse box?

 

i got mine from the junk yard cos i need it asap i will buy a new one soon

 

replaced mine its in the fusebox. didnt fix it. it was bad grounds.

 

i made severel grounds to jus to be on the safe side ,.....

 

cus i got this code right when i replaced my neg batt cable with a thicker one and put the end of the cable onto the headder bold. then i switched it back to the stock location but still nothing

 

trying maken more grounds urself or replace the fuse box under the hood

 

make more grounds off of what? the neg batt cable? i sanded down the grounding points that ive seen but still no fix. i took apart the under the hood fuse box and its all fine( no burnt termanals, no blown fuses, everything checks out) what else can i do?

 

check fuses in the car driver side ,, yes neg side batt terminal .

 

make sure a green/red is in position b19

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by droppedcrxsi &raquo;</TD></TR><TR><TD CLASS="quote">make sure a green/red is in position b19</TD></TR></TABLE>

Explain.
Thanks

 

it gets pulled out when doing obd0 vtec, so check

 

what do you mean by doing an obd0 vtec? like a swap?