Well it has been quite a while since the last FS/WTB thread, pleas keep this thread clean which means NO Postwhoring or flaming or it will get locked again!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EL Vap133 &raquo;</TD></TR><TR><TD CLASS="quote">Well it has been quite a while since the last FS/WTB thread, pleas keep this thread clean which means NO Postwhoring or flaming or it will get locked again! </TD></TR></TABLE>thanks vap your the man

 

Sohc ZC head 45
Sohc blown block 20
SI trans (NO GRINDS) 130
Black Doors 50 each
Rear Hatch 60
Map sensor w/ acc 30
SIR front JDM bumper 180
White Wing 30
Tail Light 15
non AC heater 20
quarter window 20 each
injector fuse block 20
steer. colum with tilt 40
gas tank 20
rear bumper 15
pm5 15
tokico shocks w/ springs 180
front cmplt from disc
to fork 60
rear drums and assy 40
4 steelies w/
driveable tires 65
hks cold air intake 25
cross member 20
steering rack 20
axles 35
headliner white 50 (CLEAN)
prop valve 20
master cyl + booster 35
radiator + fan 35

 

wtb crx parts:

-bolts to hold down seats
-bitch pin but needs to be for a b16
-bolt and washer that holds the torque rod to the motor
-white thing that holds on the bumpers on the side( if you dont understand I can get a pic)
-rear bumper support (89 dx)
-tires and rims....need to be good tires so i can catch traction with a b16
- over flow tank
- radiator cap
and I also need these things circled in these pics
1st pic is the hose that runs to the side of the block
2nd pic is the banjo bolt..it has two bolts and 2 washers

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxpwr1 &raquo;</TD></TR><TR><TD CLASS="quote">wtb crx parts:

-white thing that holds on the bumpers on the side( if you dont understand I can get a pic) might have this if u can get a picture

-rear bumper support (89 dx)
got it for an ed8. (hatch 91) interchangeable

- over flow tank
got it aswell

- radiator cap
might have it.
and I also need these things circled in these pics
1st pic is the hose that runs to the side of the block
2nd pic is the banjo bolt..it has two bolts and 2 washers

have these too.
</TD></TR></TABLE>

pm me if interested. gimmie 50 bucks and take all.

 

WTB: rust free swapped crx or hatch. 4,000 or less. let me know what you have

 

El Vap you are a god. WTB and FS are in my sig.

 

EL VAP
TW: FS/FT = CF48's with tires
CF wing for EF8 pending
D16a1 pistons for hgih compression a6
d16a6 flywheel
d16a6 altinator
throw me offers


Modified by 89efDUSTY at 11:22 AM 3/2/2007

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 89efDUSTY &raquo;</TD></TR><TR><TD CLASS="quote"> EL VAP
TW: FS/FT = CF48's with tires
CF wing for EF8 pending
D16a1 pistons for hgih compression a6
d16a6 flywheel
d16a6 altinator
throw me offers


Modified by 89efDUSTY at 11:22 AM 3/2/2007</TD></TR></TABLE>


make to get a hold of me if that wing sale dosent go though

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by game-over &raquo;</TD></TR><TR><TD CLASS="quote">


make to get a hold of me if that wing sale dosent go though
</TD></TR></TABLE> no problem the guy is supposed to come by tonight and lmk...

 

Real soft foam Mugen Wing new never been painted includes brackets missing Emblem NEVER BEEN PAINTED

300.00 OBO NO REASONABLE OFFER WILL BE DECLINED NEED THIS GONE ASAP !!!!
Brackets
Flexing to show its original foam or whatever that is




Modified by BoostedEF at 8:56 PM 3/5/2007

 

WTB: CRX hatch shocks (to fit '89 Si).

 

WTB:

-sohc axles
-d16a6 throttle body with good tps
-ef radiator
-89 Si racing seat brackets (hatchback)


FOR SALE!
in sig

p.s this thread rocks

 

WTB

90-91 civic hatch seats with rails
and carpet

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dkrex001 &raquo;</TD></TR><TR><TD CLASS="quote">WTB

90-91 civic hatch seats with rails
and carpet</TD></TR></TABLE>

I have teal? and one tan with rail? pm'ed

 

FS:
-Complete 6pc Wings West kit, for hatchback $300

WTB:
-Passengers side rear molding (90-91 hatch)
-Black taillight centerpiece (hatchback)


Modified by HondaFerris at 2:43 AM 3/5/2007

 

jdm crx.ef civic center console make offer or will trade for sohc turbo parts or ek/dc2 parts

 

F/S b18 LS hydro tranny Y80....has roughly around 40,000 miles on it and does not grind or pop out of any gears...was gonna keep it for a turbo build but dont have the money to have it sitting around cause I am trying to buy a b16 hydro tranny....willing to trade if you want....asking $550 pm me or email me at yz125rider21@aol.com.....P/S mounts,VSS sensor, and starter are not included










Modified by yz125rider21 at 5:11 PM 3/4/2007

 

WTB Obd0 Distributor for b16a my email Yrattrap@aol.com if u have 1 let me know price and ship. tjjx

 

UPDATE NEW PARTS

ENGINE/SWAP:
OBD0 PWO ECU-100
OBD0 PR3 ECU-100
OBD0 B16 DISTRIBUTOR- NEEDS A NEW CAP - 80
B SERIES MOUNTS- 50
DRIVERSIDE MOUNTING BRACKET - 15
REAR MOUNTING BRACKET - 15
B16 TB - 30
2 RESISTOR BOXS - 30 EACH
FUEL RAIL WITH FPR - 25
OBD0 240CC INJECTORS - 40
Y1 CABLE TRANNY...1235R WORK PERFECT 4TH DOES NOT GO IN...ALL IT NEEDS IS SYNCHROS- 75
EXEDY CLUTCH USED FOR LESS THAN 5K MILES FOR SMALL SPLINE B16 CABLE TRANNY-80
2 PAIRS OF CUTN WELD DA LINKAGE - BOTH EXTREMELY GOOD FIT N FINISH - 60 EACH
OBDO B16 MAP SENSOR WITH PURGE SOLENOID- 20

SUSPENSION/BRAKES:
EF MASTER CYLINDER AND BRAKE BOOSTER W/ RESERVOIR - 30
FRONT STRUT TOWER BRACE- PAINTED BLACK - 10
REAR LOWER TIE BAR - SILVER- 15
SI FRONT SWAY BAR- 20
RADIUS RODS- 20

BODY/INTERIOR:

HEADLIGHTS - 2 DRIVER 1 PASSENGER - 40 EACH W/BULBS
TAILIGHTS W RED CENTER GARNISH -80
OEM FRONT BUMPER WITH LIP FLAT BLACK NEEDS REFINISHING - 30
OEM REAR BUMPER UNPAINTED- 50
3 BUMPER SUPPORTS 1 FRONT 2 REAR - 30 EACH
FUGEN MIDWING UNPAINTED - 30
WW WHALE TAIL FOR HATCH-WHITE-40
BLACK OEM SIDEVIEW MIRRORS-40
REAR HATCH WITH GLASS WHITE - 50
PASSENGER DOOR W/ WINDOW AND PANEL - 80
OEM BLACK CARPET- PRACTICALLY BRAND NEW - 75
2 CENTER CONSOLES - BLUE- 15 EACH
GLOVE BOX - BLUE -10
CLIMATE CONTROL FACE - 5
2 REAR WINDOW LATCHES - 5
UNDERHOOD FUSE BOX - 5
REAR HATCH LIGHT - 1
REAR HATCH CABLE,GAS POP CABLE,AND BRACKET - 5
WHITE USDM WING - 20
GAS CAP - 5
WIPER ASSEMBLY AND MOTOR - 20
OEM HATCH SHOCKS - 2 FOR 10
REAR BUMPER FILLER - WHITE - 15
DRIVER SIDE BUMPER LIGHT -90-91-CLEAR-5
2 INTERIOR DOME LIGHTS - 1
TAILLIGHT GROMMETS - 2 FOR 1
WHITE GAS CAP COVER -5
BLACK 91 CLUSTER POD WITH DIMMER,HAZARD,DEFROST BUTTONS - 15
CHARCOAL CANISTER AND PURGE - 10
2 REARVIEW MIRROR BASES AND CAPS - 2 EACH
2 REARVIEW MIRRORS - 5 EACH
ASH TRAY - 5
UNDERDASH FUSEBOX- 5
RUBBER GROMMET FOR SHIFTER - 2
PROPORTION VALVE FROM EF DX - 10
GREY BOX UNDER DASH...I THINK ITS FOR AC- 2
BLOCK OFF PLATE FOR DASH CLOCK - 1
INNER PLASTIC PANELS FOR SIDEVIEW MIRRORS - 2
TOW HOOKS - FREE
HOOD LATCH ASSEMBLY - 10
REAR SIDE WINDOWS FOR EF HATCH - 20 FOR BOTH

LOCATED IN SOCAL 626/818 AREA...WILL NOT SHIP SO DONT EVEN BOTHER ASKING
Modified by Suck my DX at 3:32 PM 3/6/2007


Modified by Suck my DX at 2:11 PM 3/10/2007

 

link for parts in my sig.

 

WTB: 90-91 cluster with tach
90-91 hatch passenger side corner light


Modified by Pee Wee at 7:11 PM 3/6/2007

 

WTB:

- Driver side OEM corner light
- Passenger side mirror
- OEM mudflaps

All to fit a 88 Civic Std.

 

--WTB-- EF9 front bumper for hatch.

I dont care what shape its in. Although id rather not pay and arm and a leg so if its beat up and needs fixed ill take it.

 

jdm ef9 front bumper filler. 100$+ shipping obo