I have a dx crx and just got my harness professionally done. I hooked up everything except for 4 long wires that look like they go to the ecu. My question is where do they on the ecu? I have 2 red and 2 black or at least they look back. Any answers would be more than helpful.

OH, b16 with a pr3 ecu
Thanks

 

http://www.geocities.com/c_rexboy/mpfi.html
http://www.geocities.com/teampimports/fuelinj.html
http://www.bladesilver.net/crx/
http://www.fourthgenhatch.com/mpfi.html
http://www.angelfire.com/d20/h....html

There you go! Read up son!

 

Thanks for the info tippyman. I understand that 2 of the wires are my injectors and the other two for my distributor. WHere do I place them in my pr3 ecu? I noticed all the links are for PM6 or some other single cam ecu.

Thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybridmiklo &raquo;</TD></TR><TR><TD CLASS="quote">Thanks for the info tippyman. I understand that 2 of the wires are my injectors and the other two for my distributor. WHere do I place them in my pr3 ecu? I noticed all the links are for PM6 or some other single cam ecu.

Thanks </TD></TR></TABLE>

O ****, I didn't know it was a pr3. Thought it was a single slamma!

Sorry I don't really know. You need to find the ECU pinouts for that ECU and find the location.

 

is that a first gen b16 if so then its the same pin outs as the pm6 ecu.