<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -RedneckDave- &raquo;</TD></TR><TR><TD CLASS="quote"> OK so I just went through the thread and there are a few issues. If you have a question for a seller or a buyer then email or pm them. Do not make a post in the thread! If you do you will lose a point. I am tired of going through this thread and seeing the same names constantly posting about their parts. If you have some new parts to post then add them to your previous post or delete your old post and make a new one. This will help everyone by keeping the thread shorter and easier to go through when looking for parts. </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TouringAccord &raquo;</TD></TR><TR><TD CLASS="quote">After talking with -RedneckDave-, in an effort to keep this thread clean and up to date, posts older than 1 month will be deleted.

So if your post gets deleted, it's most likely because it was older than 1 month.

If your post does get deleted and your item is still for sale, please just repost it.

Thank You</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TouringAccord &raquo;</TD></TR><TR><TD CLASS="quote">January 14th 2008

DO NOT BUMP THIS THREAD!!! IT'S A STICKY!!! THERE IS NO NEED TO BUMP IT!!!

This is your warning, if you bump this thread you will be docked a % point. It should be common sense that a sticky does not need to be bumped, especial one that is current and update. But I guess some people need some extra incentive to get the point. </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TouringAccord &raquo;</TD></TR><TR><TD CLASS="quote">Also, in addition to not bumping this thread please do not post more than ONE post in this thread with the parts you have for sale. ONE post for all your parts please. There doesn't need to be multiple posts on each page listing the same parts over and over, this thread is usually only about 4-6 pages long anyways so people will see your FS/WTB post.

If I notice posts like these I will remove them, continued posting multiple posts for the same parts will result in a % point deduction.

Thank you </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TouringAccord &raquo;</TD></TR><TR><TD CLASS="quote">Please refrain from replying in this thread. If you would like to contact the user in regards to their FS or WTB post, please contact them through PM or email.

Thank you </TD></TR></TABLE>

 

so some a-hole cop pulled me over and popped the hood. now i have to get the car BAR certified and i need to put everything back to stock. if anyone is interested i would even trade you my aftermarket parts for your stock stuff.

(All parts are H22)

i have a fujitsubo h22 header, tanabe g medallion exhaust, aem fuel rail FPR all need to be replaced with factory parts. if youre interested in anything and have the factory equivalent let me know. need these parts asap


also have a skunk2 intake manifold for an h22 never used for sale. let me know what you guys got



Modified by the_unknown at 10:52 AM 10/7/2008

 

That sucks... I think you should double check your parts becuse a lot of them might have CARB stickers, just like MSD, Holley, Skunk Etc. But if need be I a H22 manifold, fuel rail and regulator to start. Already got the skunk2 set up.

 

WTB: honda access visors for 4dr 94-97 accord. please point me in the right direction! i searched and searched to no avail

i posted this in the cd squad thread earlier but thought i might try my luck here too.

 

Need money people!!!
Got a used exedy stage 1 clutch and pressure plate for H22/F22 - SOLD





JP racing grill (94-97) $SOLD


Sparco Sprint Bucket with sliders(no bracket) and blank harness(not sparco) - $165
all you need is a seat bracket for your car!!!



Modified by jdmcd7_cali-luv at 6:43 PM 10/9/2008

 

F22A1 Block and head Separted Unknown condition
F22B2 Block and head Separted Unknown condition
Local Pickup Only
Springfield, MO
Email If interested 01R6@mchsi.com

 

wtb: 14" hubcaps

fs: 90-93 glove box, burgundy color

 

Still have a brand new passenger side window motor/regulator, only fits the 94-97 2drs tho.
$65 shipped

Would post pics but it would be a pic of the box, hasn't even been opened

 

FS: 95 HONDA ACCORD MOTOR VTEC (F22B1). GOOD CONDITION. NO LEAKS. $300 OBO PLUS SHIPPING, OR PICK UP.

FS: 95 HONDA ACCORD STOCK SHOCKS AND SPRINGS. $70 PLUS SHIPPING.

FS: POA ECU. OBD1 5SPD FROM SOHC VTEC MOTOR. $60 PLUS SHIPPING.


Modified by 919DumpedCD5 at 8:14 PM 10/19/2008


Modified by 919DumpedCD5 at 6:54 PM 10/29/2008


Modified by 919DumpedCD5 at 10:48 AM 10/30/2008


Modified by 919DumpedCD5 at 10:49 AM 10/30/2008

 

94-97 Accord Halo projectors.

They are a little beat up. One of the plugs is missing but can have a new one attached.
Pictures:




Im looking for $20 + shipping on these


Modified by Merks at 10:39 PM 10/22/2008

 

WTB F22aX head. a1/a4/a6 whatever. Needs to be in decent condition. Have Paypal. Im in east TX btw.

 

I know someone was looking for this:

96 (OBDII) Accord EX 5spd ECU (POH) $60

I also have 94/95 REAR mud flaps w/ hardware

AND

Panasonic CQ C7401U
- full Accord install dash kit
- Accord Conversion harness
- Monster RCA&gt;headphone cable (so you can put your Ipod on the AUX port)
- remote

It's in sweet condition $100


Modified by TheMuffinMan at 12:51 PM 10/13/2008

 

WTB: Intake or Exhaust manifold nuts


Modified by Speedra500 at 10:19 AM 10/13/2008

 

so i got newer rims on the cb and have no room for the older ones. these will be great as full size spares. all rims have some sort of camber wear on the inside. turn em over and use the other side or leave them as is and use as spares only. 2 bottle caps have firestone firehawks. the se's have 1 potenza and 1 has road hugger. aslo have the aluminum center caps. all rims $20 for the rim , $5 for the cap for an aluminum center cap, will also sell center caps separately all in good condition with minor rashes no real curb damage. located in 562 socal. no shipping, pickup only.


se


bottlecap


and 8 caps total $5 each


562 two35-four036 -greg

 

WTB: 1993 Accord Wheels, Let me know what you got cash in hand.
Located in Rancho Cucamonga,CA

 

Looking for a set of 98-02 accord struts fronts will do if you only have. Its for a 98 v6 4 dr please pm me thanks

 

I am looking for a set of oem wheels, not steelies, tires preferred but not necessary. Let me know if you have a set available.

 

-Possibly an EDM garnish (holding for 1 of 2 members but i need money for the esp mount kit)

-JDM sidemarkers for cb

-Spider sides 90-93 accord more specs if requested Best Offer

-Integra Clock (white in color) Best Offer

-anything off a stock 92 accord 5 speed 4 door. (passenger doors front and back are both damaged though) this is leaving ASAP so inquire now!!!!!

-whale ***** intake

-<FONT SIZE="5">TESTING WATERS ONLY</FONT> on my jdm 1 piece headlights with tsx projectors retrofitted into them. they are about 95% done to my standard but anyone else's they are good. they have the eyelids and the gen 3 ballasts and a ebay hid harness ABSOULETLY NO LOWBALLING. I HAVE A LOT OF TIME AND SWEAT IN THESE.

-92-93 sedan tails OEM one has a crack i think

-ROH conversion parts (includes 99 cl hubs, prelude vtec brand new rotors and acura vigor calipers) Best Offer

-JDM illuminated license plate with leds Best Offer

 

i got a pair of headlights for 90-93 accord headlights. for $100 for more questions please e-mail. thanks.

 

Im selling four 4X114 stock rims. They have paint over them since I painted them but that can be taken off easily and paint it your choice. Im located SoCal north of Los Angeles. Anyone interested message me

 

WTB: F22A rocker assembly/cam caps!

Paypal ready!

 

WTB:

01-02 oem accord se wheels
01-02 oem accord coupe fog lights

 

as the title states a complete fuse box to fuse box underdash main wiring harness. out of a 94 accord lx 5 speed.this is uncut and all connectors are intact except the connector that runs to the emergency brake handle(green wire).60.00 picked up 100.00 shipped located in philadelphia pa

 

Looking for a vtec solenoid for a 00 honca accord v6 vtec

 

***********FS: Takata Racing Seat Seatbelts ( 4 point )************
******************1 set ( two harnesses)******************

They are brand new in box and have only been taken out to take pictures. Other than that, they are flawless. Never worn, installed, touched, etc other than that. They also come with the eye bolts.

Asking 750 (that is including paypal and shipping). These brand new these are 400 each without shipping.