ep3 seats into an eg civic... sorry i don't have pics of them installed in the car, i did these for someone else. drill out the rivets on the front mounts and cut the welds that hold them onto the rails. reweld them back on spinning them 180 degrees.

setup for tacking in place:


welded to never come off again:


all done:


mr2 intercooler modified for a bov:

 

Not bad welding looks good, What filler rod did u use on those seat brackets?

 

70s-2

 

I put those seats into my sol. I had to take off the stock mounting bracket and cut off the extentions on the side to get it low enough in the car. These seats are skyjacked. I also lifted the front of the seats so that it would hold you into the seats better.