looking for a b18c1 complete block in any condition, also b18b, or even b16 if the price is right. let me know what you have.

complete b18b1 (95) bottom end, has slightly low compression on 1 cylinder, other than that it is solid, just needs rings, but if you are rebuilding, it shouldn't matter, Asking $300 lmk

matt

also looking for full ls swap, or crv bottom end, or b16 head. as you guessed building a frankenstien, was think that or b18c1 bottom end with b16 head.

bump

I have the head also to that motor (b18b1) minus dizzy and IM. motor is like 80% complete/ valve cover to oil pan, no IM, TB, or dizzy.

matt

looking for something more local, im in new york

I have a B18a that is missing a distributor, throttle body, and alternator for $125. I then have a 1st gen B16 head. Was planning on doing a ls/vtec but knee injury ruined those plans. If you are interested lmk.

very intrested.

Hey, I have two 97 B18b Blocks, and a 94 block. If any one interested let me know. one of the 97 is mostly complete, and the other comes with a 2000 crank, and with the pistons and rods. Another comes with the type r oil pump, and water pump. If any of you interested let me know.

bump for a good price on a head? b16 or b18c5 maybe?

i got a complete b18b head here is the thread just did a lsvtec so don't need the head ne more https://honda-tech.com/zerothread?id=1036952

yes because an ls head will work fine on the ls/vtec i'm going to build right?

pm sent

(8:20 AM 10/30/2004) Shelton: hey i have a gsr short block with ctrs 2 had detionaion the other 2 are good also have a set of b16 pistons that can go with it... the block has less than 100 miles orn rebuild make offer 95 block
also have a b18a bare block with the mains caps
b18a longblock dont know the mileage but its a strong runner

are you in the ny/nj/pa area?

good luck got ne pics

anything in ny? ?????