Honda B/F/H-Series Transmission gears interchange. B-series AWD - CR-V SBXM
Honda-Tech Member
Joined: Apr 2024
Posts: 4
Likes: 0
Re: Honda B/F/H-Series Transmission gears interchange. B-series AWD - CR-V SBXM
ID x OD x H
1) 20.31 x 29.58 x 4.00mm
2) 28.29 x 38.15 x 1.55mm
3) 36.75 x 42.22 x 1.00mm
4) 28.57 x 40.74 x 2.10mm
Possible sources for these shims:
1) 20.31 x 29.58 x 4.00mm
https://www.mcmaster.com/round-shims/id~20mm/
https://www.mcmaster.com/91437A677 5 of these stacked is 3.937mm
https://www.mcmaster.com/91437A688 3 of these stacked is 4.7244mm
4) 28.57 x 40.74 x 2.10mm
https://www.mcmaster.com/97022A822/ 28.575 x 41.275 x 2.286mm
https://www.mcmaster.com/97022A464 28.575 x 41.275 x 0.508mm (stack 4 of these)
1) 20.31 x 29.58 x 4.00mm
2) 28.29 x 38.15 x 1.55mm
3) 36.75 x 42.22 x 1.00mm
4) 28.57 x 40.74 x 2.10mm
Possible sources for these shims:
1) 20.31 x 29.58 x 4.00mm
https://www.mcmaster.com/round-shims/id~20mm/
https://www.mcmaster.com/91437A677 5 of these stacked is 3.937mm
https://www.mcmaster.com/91437A688 3 of these stacked is 4.7244mm
4) 28.57 x 40.74 x 2.10mm
https://www.mcmaster.com/97022A822/ 28.575 x 41.275 x 2.286mm
https://www.mcmaster.com/97022A464 28.575 x 41.275 x 0.508mm (stack 4 of these)
Instead of buying the fwd2awd kit for my sbxm. Can I just get shims like 3 and 4 and weld gussets on the fork? Or do I still need there rolling bearings? Or do you know of any similar that’ll work? With gsr gears
Thread
Thread Starter
Forum
Replies
Last Post
hmoobhero
Transmission & Drivetrain
3
Aug 5, 2009 06:19 AM