are you able to extrapolate from this graph... ?
Thread Starter
Honda-Tech Member
Joined: Jul 2001
Posts: 5,056
Likes: 1
From: Kensington, MD, USA
are you able to extrapolate from this graph... ?
Looking at the torque curve(s) below, are you able to extrapolate where the small lobe torque curve might meet the big lobe torque curve knowing that the VTEC crossover occurred at ~5,500 RPM?
Thanks a lot.
Thanks a lot.
Honda-Tech Member
Joined: Nov 2001
Posts: 3,968
Likes: 1
From: Austin, Tx, USA
Re: are you able to extrapolate from this graph... ? (4doorH22)
if you have an H22, and no VTEC controller, then VTEC engages at 5,000 RPM. I think lowering it to 4700 or 4800 is as far as you want to go
New User
Joined: Sep 2001
Posts: 73
Likes: 0
From: San Diego, CA, usa
Re: are you able to extrapolate from this graph... ? (4doorH22)
looks to me like the xover was just before 5000. I am looking at the little dip in the hp. The torque really jumps right after that.
Thread
Thread Starter
Forum
Replies
Last Post