Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

To squirt or not to squirt?

Thread Tools
 
Search this Thread
 
Old Dec 7, 2002 | 10:01 PM
  #1  
B16A1-EF9's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Jul 2001
Posts: 676
Likes: 0
From: Toronto, Ontario, Canada
Default To squirt or not to squirt?

That's my question. Should I get the oil squirters installed in my ls/vtec or not. I've heard that you don't need them and I've heard that it's only good insurance anyway to install them.

Any ideas guys?
Reply
Old Dec 7, 2002 | 11:29 PM
  #2  
Kataku2K3's Avatar
Honda-Tech Member
 
Joined: Dec 2001
Posts: 5,418
Likes: 5
From: Gresham, Oregon, USA
Default Re: To squirt or not to squirt? (B16A1 - EF9)

I would just leave it... For all the LSVTEC's i've seen and built... I've never have had them done or seen them done and it works just fine... They just unbalance your rotating assembly so even on a GSR block i have them tapped... Latez...
Reply
Old Dec 7, 2002 | 11:45 PM
  #3  
salbaje's Avatar
Honda-Tech Member
 
Joined: Dec 2001
Posts: 3,786
Likes: 0
From: NORCAL, CA, USA
Default Re: To squirt or not to squirt? (B16A1 - EF9)

you dont need them just use an itr oil pump
Reply
Old Dec 8, 2002 | 09:07 AM
  #4  
earl's Avatar
Honda-Tech Member
 
Joined: Jun 2001
Posts: 8,120
Likes: 2
From: Irvine, CA, usa
Default Re: To squirt or not to squirt? (JDMspecEG6)

I would just leave it... For all the LSVTEC's i've seen and built... I've never have had them done or seen them done and it works just fine... They just unbalance your rotating assembly so even on a GSR block i have them tapped... Latez...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
95coupeb
All Motor / Naturally Aspirated
7
Jun 15, 2010 10:00 PM
patrickcrx
All Motor / Naturally Aspirated
4
Nov 29, 2006 11:16 AM
1quickhatch
All Motor / Naturally Aspirated
46
Feb 1, 2005 11:40 PM
-Racer X-
All Motor / Naturally Aspirated
13
Jul 2, 2003 10:54 AM
B16A1-EF9
Tech / Misc
4
Dec 7, 2002 03:27 PM




All times are GMT -8. The time now is 11:02 PM.