i have also posted on pgmfi.org but no comment yet so i wanted to know what you guys thought.

--------------------------------------------------------------------------------

http://pgmfi.org/resources/FAQ...l.jpg
ok that is what my ecu looks like but i cant find any where what to do with it because i ordered this kit http://www.xenocron.com/produc...gkits and there is only one spot where any of the chips fit. on the ecu picture there is a chip on the right side of the ecu at the bottom, and that is the only one that is like the other chips as far as size goes. and on the top part of the right side that board comes off i couldnt find any ecu that looks like it so if anyone could help?

 

what do you want to know, its pretty simple to do

 

do u put the logger or the little thing to burn the chips in the ecu or burn it then put the chip in the ecu? because if it goes in the ecu i dont know how to hook it up in there so if anyone could give me a little instruction that would be great and iv looked all over pgmfi.org and couldnt find anything i think im just retarted or somethin cuz im lost.

 

you suck you didnt even look man, theres something called the wiki
or the library did you look no.
this is the only hand out for you
http://www.pgmfi.org/twiki/bin...pping

you better get reading
go to the bottom of the page it will say obd0 ecu chipping wow took me only like zero minutes to find.

 

umm acutally iv been there for like a week and it still doesnt say anything about the chip burner and if i burn the chip then put it in but if i did that how would i do all the tuning stuff? so thanks for the handout really helped


Modified by teamredline9k at 6:04 PM 6/20/2006

 

again go to the library and look and read
heres were you should have found rom burners
http://www.pgmfi.org/twiki/bin...urner
was that so hard
for you Search

 

burn the chip and then put the chip in the ECU

 

thanks thats what i wanted to know