Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

Motor stalling out

Thread Tools
 
Search this Thread
 
Old Mar 21, 2006 | 08:54 AM
  #1  
JDMtype Eg6's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2005
Posts: 309
Likes: 0
From: San Diego 619, Ca
Default Motor stalling out

Last week i recently had my valves adjusted, timing fixed, replaced cam seal and new alternator. Car ran way smoother and idled great, until i started my car this morning. It looked like it had been raining all night and when i started my car it idled really low about 100-200 rpm with a rough idle(needle not jumping though ). It sounded like i was running on 3 cylinders. Also black and bluish smoke was coming out of my exhaust,also my engine bay. The car would idle but once i pressed on the gas and let off all the way the car will stall out. This happens everytime i do it. Any help or advice will be apreciated. Thanks

p.s This rough idle has happened in cold weather before but car usually runs fine.

<U>cliffs</U>
-low/rough idle
-black/blue smoke out of exhuast
-smoke out of engine bay
-stalling out when revved
Reply
Old Mar 21, 2006 | 01:33 PM
  #2  
JDMtype Eg6's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2005
Posts: 309
Likes: 0
From: San Diego 619, Ca
Default

alright, the weather became clear and i started my car again. It idled kinda ruff but not as much, then i lowered fuel psi to 43, and now it idles perfect. Could high fuel pressure be the cause of this?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
acuralovar
Acura Integra
5
Mar 31, 2011 11:14 AM
JDMtype Eg6
Tech / Misc
3
Nov 24, 2005 01:44 PM
Full Race A6
Honda CRX / EF Civic (1988 - 1991)
48
Jul 4, 2004 02:34 PM
TurboJesse
Tech / Misc
1
Sep 1, 2003 01:12 PM
B00ST2nR
Acura Integra
27
Sep 5, 2002 03:37 PM




All times are GMT -8. The time now is 02:27 AM.