im in the middle of the safc2 install on my 96 ls. im pretty sure that everything is hooked up rite to the ecu, but the safc isnt turing on wen i start the car. im also getting a cel which im assuming has something to do w/ the pressure sensor since i had to splice that wire w/ the install and since the safc isnt turning on, there r no readings going to the ecu...help!!! ne suggestions r appreciated, thanks.

 

bump

 

code 13?

use the wiring dias on apexi-usa.com

 

im sure ive wired it ok, is there ne way to test the safc to c if it is defective or something?

 

are u sure the wiring on the safc2 is exaqctly the same as the safc1?