i have a lsvtec know

But its starting to get on my nerves

RIGHT NOW i have b18b/b16a2

I want to know if i take b18c1 block/ b16 head / ls crank what else would i need to complete the motor i am reusing my ls crank and rod .
I AM AWARE THIS IS SIMILAR TO A POORMAN R BUT a using a ls crank to keep my lsvtec and get rid of leaking oil line, and head gasket which were all new

 

 

i just want to use a gsr block with b16 head instead of a ls block . i am still want 2 use the ls crank, and rods but use the gsr block4 the girdle , main caps, oil squirters etc i had a ge girdle that would not work on my lsvtec once already so i want to try lsvtec a different way

 

its been done many times before and will work. all u need is your crank and rods then whatever pistons you want. ull be fine.

 

that's what i thought when i was searching no 1 really had a configuration like that my crank and rods are fine . i know i'll need new rings