For those who dont know:
USDM Prelude headlights use one filament bulbs (two wires each) and for some reason Honda made it where JDM Prelude headlights use a H4 (2-filament) bulb for the low beam only and I'd like to wire the secondary to come on when the H1 (brights bulb) is kicked on. I couldnt find a diagram that showed the secondary filament in the H4 bulbs being used when the brights (H1's) were switched on. I'm decent w/ electrical circuits, but no expert by any means, so this is what I've plotted out, and I was wanting some feedback of if everything looked alright or



Lemme know what you think.

K