I ordered some ITR cams from ebay......and now my car wont stay running at idle....and it seems to be misfiring....kind of like the car is out of time....but the thing is all timing marks line up.....timing belt is on time.....anybody ever have this issue with cams before?? possibly the wrong/messed up cams.....

 

double check your timing. same thing was happenin on this crx my buddy has. turns out that TDC was a different than how it looks. he was actually a few degrees retarded. i'll get the full completedetails from him adn get back to you.

 

I did check my timing...and it appears to be on...let me know what happened with your buddy's crx...

 

distributor could be 180 degrees off.
put motor to top dead center,take distributor off and make sure the 2 lines are parallel.

 

Did you use the white or red mark to find TDC? The white mark is correct.

 

Get a degree wheel and a dial indicator. This is the only way to accuratly phase your cams correctly with your crank. The marks should only be used as a visual referance. There are kits out there that you can by that has everything you need to phase you cams right

 

check the valve lash???? , then