How can I reach that TDC sensor?
Thread Starter
Joined: Feb 2004
Posts: 37
Likes: 0
How can I reach that TDC sensor?
This is a technical question. I have an ECU code 8. Its the TDC. I checked the resistance and its ok too.
Sooo I started dismantling the whole distributor to go see what is wrong with this magnetic sensor.
Now my question is: The first sensor is right behind the cap rotor and easely accessible but the other 2 are at the ''bottom'' of the distributor. There is a metal plate that I just can't remove. I unscrewed the 3 screws but that plate don't want to go off! I can't reach the TDC sensor because of that.
How can you reach it and is there any other way to check what the problem is? I'll bet its a bad wire or something
Thx for the help all.
Sooo I started dismantling the whole distributor to go see what is wrong with this magnetic sensor.
Now my question is: The first sensor is right behind the cap rotor and easely accessible but the other 2 are at the ''bottom'' of the distributor. There is a metal plate that I just can't remove. I unscrewed the 3 screws but that plate don't want to go off! I can't reach the TDC sensor because of that.
How can you reach it and is there any other way to check what the problem is? I'll bet its a bad wire or something
Thx for the help all.
Thread
Thread Starter
Forum
Replies
Last Post
$C-BRAM$
Honda CRX / EF Civic (1988 - 1991)
3
Feb 12, 2010 09:34 AM
rival12
Honda CRX / EF Civic (1988 - 1991)
4
Jun 2, 2008 10:30 PM
quik89
Honda CRX / EF Civic (1988 - 1991)
7
Nov 30, 2003 06:43 PM