Has anyone done this set up? Hondata told me to purchase the stage 2b for this customer, wich I did. They said that since it is an auto I will need the 2b and not the S200. Here is what they said.
Convert to obd 1 using a jumper harness not the obd1 w/ obd 2 connector because I will have to rewire some pins on the jumper harness to make the tranny shift correctly.

Matt from Hondata told me that the problem will be getting the torque converter to lock up. If anyone has any info that might help me with this project it would be greatley appreciated!!!

ie... wiring diagrams, pin outs, auto tranny wiring info, etc...