I have a stage 3 Hondata system, I have had it for almost a year. For some reason the full throttle shift and the drag launch system are not working. This just happened, I did not do anything funny the just stoped working WTF. Somebody help me please.
Thanks Jason

 

chcek your clutch switch

 

Is there any way you could show me a picture of what I should be looking at. I lost my manual I the move and I'm lost .
Thanks for any help jason

 

who installed it?

 

AEBS in San Diego. Everything was working great but I just drop it to 3rd from about 70 went up to 9300 and in went the clutch and up went the rpm's. I just dont get it.

 

check all the connections and and the switch which should be mounted near the clutch pedal assembly

 

I do see anything. Maybe I'll post a pic of it later.

 

possible switch or your programming went sour.

 

I hope my programming did not go sour
is there anyway to tell for sure if it has.

 

If everything else is working correctly with the Hondata setup, with the exception of the clutch features, it's very unlikely the Hondata programming is at fault. It's almost certainly the switch at the clutch as was suggested. Inspect it visually, test it with an ohmeter.